nighteyes2017 Posted Wednesday at 09:57 PM Posted Wednesday at 09:57 PM Ok, a friend of mine had this weird problem with an X65f from saitek in windows 11. I found a post with a solution that finally worked, and i thought I'd share for future reference and for anyone having problems. The symptom are that in windows, the calibration of the axes seem fine, but in dcs the axis give 100% or -100% and nothing in between. turns out the calibration process, gets stored in the windows registry with the wrong values. Deleting these entries solves the problem, or, if you need deadzones, you can adjust the values manually. the post tells you how i found it in this post, read carefully. https://forum.piboso.com/index.php?topic=20051.0 the post describes W10, but W11 works just fine as well. As i said, i ended up just deleting the calibration entries for the faulty axis and that worked. (reboot after deleting or adjusting) you need your product id used in the registry. i found that here: https://forum.simflight.com/topic/78117-fixing-problems-with-50-or-digital-onoff-action-with-saitek-levers/ this post didn't actually work, but going into the registry there i was able to identify the needed id because the entry values said saitek. so i cross referenced that with the other post and voila!. it is also possible to just go over the registry entries and see which one has a subfolder named 'calibration' it.
Recommended Posts