DevilDog0323 Posted December 30, 2011 Posted December 30, 2011 i can get the tower to respond when i am starting engines, take off, landings ect but i cannot get the ground crew to rearm, refuel or anything. any one know how to fix this?
DevilDog0323 Posted December 30, 2011 Author Posted December 30, 2011 i am also unable to save any missions i make. i have been using the correct file to save it under but i am unable to save it.
EtherealN Posted December 30, 2011 Posted December 30, 2011 i can get the tower to respond when i am starting engines, take off, landings ect but i cannot get the ground crew to rearm, refuel or anything. any one know how to fix this? Turn radio knob to "Ground crew". ;) [sIGPIC][/sIGPIC] Daniel "EtherealN" Agorander | Даниэль "эфирныйн" Агорандер Intel i7 2600K @ 4.4GHz, ASUS Sabertooth P67, 8GB Corsair Vengeance @ 1600MHz, ASUS GTX 560Ti DirectCU II 1GB, Samsung 830series 512GB SSD, Corsair AX850w, two BENQ screens and TM HOTAS Warthog DCS: A-10C Warthog FAQ | DCS: P-51D FAQ | Remember to read the Forum Rules | | | Life of a Game Tester
EtherealN Posted December 30, 2011 Posted December 30, 2011 i am also unable to save any missions i make. i have been using the correct file to save it under but i am unable to save it. Ensure the program has write permission. Where exactly are you saving it, where is the program installed, and what operating system are you using? [sIGPIC][/sIGPIC] Daniel "EtherealN" Agorander | Даниэль "эфирныйн" Агорандер Intel i7 2600K @ 4.4GHz, ASUS Sabertooth P67, 8GB Corsair Vengeance @ 1600MHz, ASUS GTX 560Ti DirectCU II 1GB, Samsung 830series 512GB SSD, Corsair AX850w, two BENQ screens and TM HOTAS Warthog DCS: A-10C Warthog FAQ | DCS: P-51D FAQ | Remember to read the Forum Rules | | | Life of a Game Tester
DevilDog0323 Posted December 30, 2011 Author Posted December 30, 2011 im using windows 7 64 bit, and its installed into program files (86). when i am saving the mission i am going into program files 86, and saving under missions for ka50 but cannot find the file after that. it worked fine with the first black shark but not on BS2. also with the radio i do set it to ground grew and still no response.
EtherealN Posted December 30, 2011 Posted December 30, 2011 Files are saved under C:\Users\XXXXXXX\Black Shark 2\Missions\ [sIGPIC][/sIGPIC] Daniel "EtherealN" Agorander | Даниэль "эфирныйн" Агорандер Intel i7 2600K @ 4.4GHz, ASUS Sabertooth P67, 8GB Corsair Vengeance @ 1600MHz, ASUS GTX 560Ti DirectCU II 1GB, Samsung 830series 512GB SSD, Corsair AX850w, two BENQ screens and TM HOTAS Warthog DCS: A-10C Warthog FAQ | DCS: P-51D FAQ | Remember to read the Forum Rules | | | Life of a Game Tester
DevilDog0323 Posted December 30, 2011 Author Posted December 30, 2011 ok that got the mission save. any ideas on the ground crew? i do set the comms to ground crew with the engines on and no response. i shut down everything open the hatch and still no response. never had that problem before with the first black shark.
msalama Posted December 30, 2011 Posted December 30, 2011 Don't want to underestimate you mate, but still have to ask if you've got the required ground units in place as well? The DCS Mi-8MTV2. The best aviational BBW experience you could ever dream of.
DevilDog0323 Posted December 31, 2011 Author Posted December 31, 2011 well that might be part of the problem lol. what are the right units i need?
msalama Posted December 31, 2011 Posted December 31, 2011 From the flight manual, p. 1424: Eastern forces: 1. CP SKP-11 command post, FARP command post for radio communications 2. GPU APA-50 or GPU APA-80 for electrical power 3. ATMZ-5, ATZ-10, Transport URAL-375 or FARP Fuel Depot for refueling 4. URAL-375 transport or FARP Ammo Dump for rearming Western forces: 1. M1025 HMMWV APC for radio communications 2. M818 transport for electrical power 3. M978 HEMTT tanker for refueling 4. M818 transport for rearming HTH mate :) The DCS Mi-8MTV2. The best aviational BBW experience you could ever dream of.
DevilDog0323 Posted December 31, 2011 Author Posted December 31, 2011 outstanding that fixed it. thank you for the help.
chinggis Posted November 10, 2016 Posted November 10, 2016 Ground crew "disappears" when you save a quick mission Much appreciated info about the necessary ground units! I was going crazy trying to understand how a quick mission let me ramp start the F86F, but when I saved the mission to edit it, the ground crew stopped responding. I manually added the : 1. M1025 HMMWV APC for radio communications 2. M818 transport for electrical power 3. M978 HEMTT tanker for refueling 4. M818 transport for rearming And the problem is sorted.
Recommended Posts