Mission Broke Snapviews and TIR Center

[boomerFranck]

I found similar but not the same threads out there. If this has been answered somewhere else, please post the link.

 

After loading a multiplayer mission, I damaged my snapview files. I have been able to recover almost completely from this rookie mistake, except my TIR center position.

 

All the snapviews work, when I re-center TIR it points to my lower left on the canopy rail, just above the radio volume controls.

 

For clarity, my snapview NUM0 works fine, when I re-center TIR it points lower left in cockpit.

 

My SnapViewsDefault.lua :

 

 

Snap[11] = {} 								-- A-10C
Snap[11][1] = {}
Snap[11][1]["viewAngle"] = 65
Snap[11][1]["x_trans"] = 0
Snap[11][1]["z_trans"] = 0
Snap[11][1]["rollAngle"] = 0
Snap[11][1]["vAngle"] = -26
Snap[11][1]["y_trans"] = 0
Snap[11][1]["hAngle"] = 0
Snap[11][2] = {}
Snap[11][2]["viewAngle"] = 49.62
Snap[11][2]["x_trans"] = 0.18049918980401
Snap[11][2]["z_trans"] = -0.25
Snap[11][2]["rollAngle"] = 0
Snap[11][2]["vAngle"] = -90.631294535534
Snap[11][2]["y_trans"] = -0.13706404481321
Snap[11][2]["hAngle"] = 0
Snap[11][3] = {}
Snap[11][3]["viewAngle"] = 30.395041
Snap[11][3]["x_trans"] = 0.37271843489025
Snap[11][3]["z_trans"] = 0.25
Snap[11][3]["rollAngle"] = 0
Snap[11][3]["vAngle"] = -94.329208628031
Snap[11][3]["y_trans"] = -0.054055240445808
Snap[11][3]["hAngle"] = 0
Snap[11][4] = {}
Snap[11][4]["viewAngle"] = 55.238569
Snap[11][4]["x_trans"] = 0.15852287502165
Snap[11][4]["z_trans"] = 0.25
Snap[11][4]["rollAngle"] = 0
Snap[11][4]["vAngle"] = -90.631294535534
Snap[11][4]["y_trans"] = -0.13706404481321
Snap[11][4]["hAngle"] = 0
Snap[11][5] = {}
Snap[11][5]["viewAngle"] = 35
Snap[11][5]["x_trans"] = 0.32762247014528
Snap[11][5]["z_trans"] = -0.24479886800933
Snap[11][5]["rollAngle"] = 0
Snap[11][5]["vAngle"] = -10.651849345676
Snap[11][5]["y_trans"] = -0.27820714509734
Snap[11][5]["hAngle"] = 0
Snap[11][6] = {}
Snap[11][6]["y_trans"] = 0
Snap[11][6]["x_trans"] = 0
Snap[11][6]["hAngle"] = 0
Snap[11][6]["viewAngle"] = 34.340549468994
Snap[11][6]["vAngle"] = -9.5
Snap[11][6]["rollAngle"] = 0
Snap[11][6]["z_trans"] = 0
Snap[11][7] = {}
Snap[11][7]["viewAngle"] = 35
Snap[11][7]["x_trans"] = 0.32762247014528
Snap[11][7]["z_trans"] = 0.24479886800933
Snap[11][7]["rollAngle"] = 0
Snap[11][7]["vAngle"] = -10.651849345676
Snap[11][7]["y_trans"] = -0.27820714509734
Snap[11][7]["hAngle"] = 0
Snap[11][8] = {}
Snap[11][8]["viewAngle"] = 68.628295898438
Snap[11][8]["x_trans"] = 0
Snap[11][8]["z_trans"] = 0
Snap[11][8]["rollAngle"] = 0
Snap[11][8]["vAngle"] = -11.477349281311
Snap[11][8]["y_trans"] = 0
Snap[11][8]["hAngle"] = 68.292320251465
Snap[11][9] = {}
Snap[11][9]["viewAngle"] = 68.628295898438
Snap[11][9]["x_trans"] = 0
Snap[11][9]["z_trans"] = 0
Snap[11][9]["rollAngle"] = 0
Snap[11][9]["vAngle"] = 30.227918624878
Snap[11][9]["y_trans"] = 0
Snap[11][9]["hAngle"] = 0
Snap[11][10] = {}
Snap[11][10]["viewAngle"] = 68.628295898438
Snap[11][10]["x_trans"] = 0
Snap[11][10]["z_trans"] = 0
Snap[11][10]["rollAngle"] = 0
Snap[11][10]["vAngle"] = -11.477349281311
Snap[11][10]["y_trans"] = 0
Snap[11][10]["hAngle"] = -67.172973632813
Snap[11][11] = {}
Snap[11][11]["viewAngle"] = 70
Snap[11][11]["x_trans"] = 0.36
Snap[11][11]["z_trans"] = 0
Snap[11][11]["rollAngle"] = 0
Snap[11][11]["vAngle"] = 8
Snap[11][11]["y_trans"] = -0.041336805555556
Snap[11][11]["hAngle"] = 20
Snap[11][12] = {}
Snap[11][12]["viewAngle"] = 70
Snap[11][12]["x_trans"] = 0.36
Snap[11][12]["z_trans"] = 0
Snap[11][12]["rollAngle"] = 0
Snap[11][12]["vAngle"] = 8
Snap[11][12]["y_trans"] = -0.041336805555556
Snap[11][12]["hAngle"] = -20
Snap[11][13] = {}
Snap[11][13]["viewAngle"] = 90
Snap[11][13]["y_trans"] = -0.02
Snap[11][13]["x_trans"] = 0.27
Snap[11][13]["hAngle"] = 0
Snap[11][13]["rollAngle"] = 0
Snap[11][13]["vAngle"] = -21
Snap[11][13]["rollAngle"]= 0
Snap[11][13]["z_trans"] = 0