Licenceless

@sleighzy @MAXsennadcs.log This time nothing crashed and i did the same scenario as always, taking off from the carrier in A4 on the same empty server. I had to rename mods.old back to mods because I need to fly the A4. I do have the original cable and it has given me loads of trouble - blue screen crashes. It takes a few dozen tries of plugging and unplugging to start it properly, mostly it gives 4-1 or 7-14 errors. I am using a WIN 10 22h2 build 19045.5608. Unplug and plug events were because I did turn hotplug on for a sec as DCS would recognize my stick as my throttle, I managed to make it work and disabled hotplug later. I am using a powered USB hub. Its a DC 5V one. It has given me problems previously so the only thing plugged into it is my Reverb G2 cable with type c to 3.0 adapter, the hub is plugged into the front panel. The rest of the peripherals are plugged into my a350b mobo. I disabled power management in device manager for all USB stuff. I noticed that it keeps reloading so something is constantly plugged and unplugged. It only happens when I plug in the headset and I can see USB symbol flashing in bottom right of windows screen panel. I found which USB it is in device manager by process of elimination but it doesn't have power management tab. My specs are R7 5800X3D 32gb ddr4 at 3200mhz NVME m.2 (for DCS with a 64gb page file) SSD HDD RTX 3080 750watt corsair power supply (silver 80 plus) I have a theory that my power supply just isn't enough for all the peripherals and the system with main culprit being the 3080.

@MAXsennaDone, should I retry and provide a new log?

@rob10 i'm not good with computers, what do i need to look for?

dcs.log This is the log file posted immediately after crash. Until now it it worked "fine" - VR would display a blue screen for a split second and crash every now and than. Now it just crashes. Sometimes after a couple of minutes I spawn in the plane, some times immediately upon spawn.

thaks, Ill try that later

I give you F5 because I haven't flown it in years, and yes I don't hang out on forums, only in discord and haven't seen people complaining about it there but it is what it is. You're right, maybe ED has some omega plan and will make everything better. Thing is - they need people buying modules to fund further development. That is the main problem, how am I supposed to keep buying modules, wait patiently and hope that things will get better if what I see is ruins my hopes? I waited and hoped long enough, I've bought enough modules, and after all this time results are very disappointing. I'm not gonna spend any more money or be more lenient just to see them add one detail per year like new gun sounds for pony or new suspension model, especially when every update I open up the changelog and see biblical amount of updates and fixes on modern jets and scroll down to ww2 just to see "P51: adjusted weather in campaign mission" 99% of the time.

90, I tried 60 but it's to low, I get headaches from it

Yes we don't know a lot of things but what we do know is what ED tells and shows us, and they've shown that they are investing a ton of resources in a new separate product with very vague and uncertain potential instead of putting those resources into a long ongoing project with established population of players and potential which still needs a ton of work to be done on. The thing about F-5 is that It doesn't need that much work. F5 is beloved by many because of it's simplicity and very well done flight physics. It's the most popular cold war era bird. It's not broken as far as I know. The only thing it needs is updated textures since it was released somewhere in 2016. Nobody ever said F5 is a garbage module and that it's abandoned. So fair Point to ED for doing work on the F5 What about 109 and pony though? They are older than F5 in terms of release and still have some problems and unfinished systems, not to mention even older and crappier textures. Hell, throw the Dora in there too cuz that birb looks old as hell. And yet what got a visual upgrade? The Spit. It's way more recent than others. Sure it looked like hot garbage but what about the others. This is what I'm trying to say: ED, for a company that sells overly expensive flying pixels doesn't seem to have their priorities straight and their <profanity> together. They can talk all they want what kind of company they are, what kind of business they have and what kind of products they make but the fact remains: there is an unspoken agreement that if we as customers will buy into a given branch of their products be it WTO or PTO or Korea or Georgia they will continue to develop it to completion; because we are not study simmers from some academy or some dudes who want to fly some Christen Eagle over Nevada. Most people buy ED products because we are gamers/historical recreationists who want a complete experience and ED knows it. The only reason so many of us throughout the years has given ED money for some incomplete stuff is because we want to help ED to make a complete product - AND ED KNOWS IT.

Stutters are at 0:03, 0:08 and 0:21, I guess one would call them freezes. It's a win10 install, bios updated to latest version, there is only one xmp profile for 3200mhz and to be honest I don't wanna mess with timings. No overclocking, I don't see any need with these specs. Cooling is sufficient, I have a big cpu cooler and enough case fans at pretty neutral pressure. Everything runs like butter on 4k (not ultra obviously, I tweak stuff for optimal eyecandy/fps), even other games in VR which are pretty intense like ACC runs very well, even with all the periferals in the hub. So this is what I did: 1 removed all the periferals from usb hub and stuck them directly into the mobo 2 changed some settings (textures high, clutter grass on max, forest visibility on max, LOD switch at 0.8, shadows and terrain shadows flat or low, visibility on extreme, clouds on ultra preload is 60k flare is on texture filtering 16x) Usb hub thing seemed to do the trickat first but as soon as I connected to 4ya PO (server was almost empty with 6 people on, june 3rd mission) for the second time, it began to freeze again (way less mind you). FPS in it self was never an issue, it was always high. CPU threadbound written in red very often, almost every frame it would flash between the yellow cpu bound and the red thread bound. The freezes occur when those green lines go all the way up, except for the last one cuz it froze every time i took a screenshot as well. And taking screenshots would F up frame time too. I actually couldn't see what the frame times were because the would constantly change so fast that I could barely read them, it was rapresented by two numbers and both kept switching betwen 0, 1 and 2 so my guess FTimes are very low Also Log file provided below. )null dcs.log

I understand the potential of PTO but all I can see is the abandonment of WTO.

1 My mouse polling rate goes up to 1000Hz. I checked it on a website, can't find a way to adjust it without downloading bloatware. Also, as you can see in the video the issue doesn't appear when I move my mouse around the menu. If you can provide a way to adjust it through cmd that'd be great. 2 This is a fresh windows install, DCS and Discord, that's it. Page file is set to 62gb on the NVME the game is on. Main C drive is a 250gb SSD and I only have 150gb free, I could sacrifice the space for page file on the main C drive if you say it's a good idea. 3 DCS is running on lowest possible settings with preload radius at 60 000. 80% resolution. Only thing I did in WMR settings is disabling all audio in headset since I do not use inbuilt speakers. 4 hub is fully occupied because I have no space but I guess I can switch stuff around and maybe deactivate something I don't use. I used to run everything off my mobo but than i head an issue where mobo didn't have enough power for everything and thus I bought a hub 5 can you tell me how to provide a log file?

Hello, had this ever since I got my G2. As you can see the game just stutters a lot. R7 5800X3D RTX 3080 10GB 32GB ram 3200mhz Game is installed on an NVME M.2 (1TB) Some of my friends have same exact specs and also use G2 and have no problems. USB cable from G2 is connected via powered usb hub. It simply doesn't work when connected directly into the mobo, i think it's a known issue but i digress, my friends who have G2 also connect it through the hub and again, they have no issues so i don't think that is the issue.

Well, I guess the point here is that we already invested in ww2, Corsair being made is in it self a problem (at least for me). Imagine it this way: (it's a weird example but please bare with me) You see a new promising "build your self" car on the market, lets say a Ford; it has the best suspension and very good traction, better than anything on the market, it's on the expensive side but for true enthusiasts it's worth it. Problem is the the company hasn't made all the parts yet. It's missing a lot of features like a dashboard and what not, no horn, no windows etc.. You still buy it because you're enthusiastic about the product and it's very promising, very good base to go forward from. All of the sudden the company starts making just the seats floor mats for a completely different car and they contract someone to make a hood and that contractor has been making that hood for 8 years even though other contractors pump out good quality ones on a much more stable basis. Than you wonder, "who is going to buy that, it has little promise and potential and the company hasn't even finished completing MY car yet". You loose faith in the company and you feel cheated out of your money especially when the same company makes electric cars which are much more complex but they still make more of them.

@Kangstuka is not a good choice because it doesn't add to the current theatre, similar to i16 stuka wasn't in use in 44 anymore, that is why iI think F4U and F6F are a waste. Also, i don't know anything about this "transforming existing FF modules into FC", i was talking about making new ones, if they made like 2 or 3 new FC style modules for Normandy accurate to the map and period it would bring that necessary interest to boost WW2 for some time, meanwhile they could either work on another batch of planes for the same period and theatre or keep working on existing ones and transforming them into FF, slowly but surely

@Kang to be fair, the community voiced what they want a lot, i get that ED relies heavily on 3rd party which according to latest news is a bit of a problem, still, disregarding the f4u which is 3rd party, instead of the hellcat they could have started work on a 109 g of some sort and the team behind mariannas and the one behind PTO assets could have also started to do some QOL work for WTO. FC style aircraft is an option but the question is what and how much you want to secrifice in terms of realism, i think jet FC is easier due to simpler flying characteristics and 0 engine management/limits.