AX47

By the way the RHM/LD switch is not correct fitted. It shall be aligned 9oclock/3oclock

Make a flight above 500 mLastMissionTrack.trk set QFE on 992 fly on Radar altitude and toggle STD/QFE

Yesterday we flew Attack Mission on Kola Map. First legs was cruise on 2000m STD. Sea target QFE was 1013 so STD was remained on Altimeter. Radio Altimeter was set to RHM during whole flight. When descending to 700M the Radio Altimeter value drop down to 180 m still in RHM. Barometic altimeter was at 700 m (see picture) When checking Radio Altimeter it seems that there is a BUG above 500 m as the value follows Barometic setting and not radio Height value. PLS EXPLAIN

When i Flew Squadnight i Sunday this correction was according picture on Jokkmokk When i connect to Kola map today the deviation is +10

I have a suggestion : Set course correction fixed at 0 degree. We had that IRL in AJ37 and SF/SH37 Reason: course correction is not correct f.e.in Kola Map and with course corr. 0 deg.TILS approaches are flown with less heading deviations. I add Luleå ESPA and in Viggen you have -5 degrees compared to correct value almost + 10 degrees. Why not remove course correction in checklist and set change correction to 0 degrees in the system.

Why black-out at 9 G. A fighter pilot shall be able to fly in combat with 9G in turn pls correct.

If You launch at max distance and BX7 is positioned offset the RB15 continues to target dead-stick as long as it can fly above sea level.

Still not fixed at least not on Kola map

Look at "Area to be covered by seeker". The RB-15 will continue search as it flies forward as long as the engine is running ( ca 70km). To try to clarify if you have a target 50 km away and You launch in QuickRelease the RB-15 will fly 30 km until target will be locked in the 20 km seekler cone. MYSE1234 has confirmed that this function is deleted in last update.

Nice hit. We will start-up flight operations in NOSIG next week so looking forward next update to get all systems fully operational.

Yes it worked before the update. You have done a great job with RB15 apart from this little bug and we have noticed that you shall not exceed M0.9 in order to launch in SERIE, reason Missile no 2 BX8 will collide with no 1 if you launch in too high speed (above M0.9). BX8,BX7 and BX6 are very good positioned in RadarScope....:)

When you mixed with RB-15 You made QuickReleaseMode to disappear in the system. The missile doesn't seek after launch, just flying blind.

When You use RB-15 in Quick Release mode, Selecting target on Radar, NAV mode and firing within 70 km it ends up with missing Target. In Quick mode the RB-15 doesn't seek for targets att all, just flies on initial course. and passes the target. This is a SEVERE BUG and I hope it will be corrected in near future