Lostcat
-
Posts
74 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Lostcat
-
-
Same problem on Texaco's tacan in mission number 5
my skills in saving fuel are increasing a lot
Great fun, very good campaign
-
Thanks, i tried turning on/off the tacan, switching between aa, ag, t/r, transmit ecc.... no way......
.
But i'm a champ in saving fuel
-
Hi,
just completed mission number 3.
When asked to refuel i selected the right frequency for the tacan to meet the tanker but the indicator started spinning around and showed the right codename "TKR" but the bearing constantly changing and the distance to the tanker steady at 0.0 miles.
I just skipped the refuel via f10 and managed to continue saving fuel and complete the mission getting back to the Stennis whit 240 lbs of fuel left. (tacan of the Stennis worked well)
-
Hi guys,
just flying for the first times in vr with the new rig, looking at z-gpu it seems that my card is capped for VRel and VOp but ONLY when i'm on the desktop. When i'm flying in dcs or i'm in hte main menù of dcs the limit seems to disappear.
Actually i'm flying "raven one" campaign and with a pd of 1.7 and asw at 45hz it's very smooth but maybe i have some settings in windows that are limiting my gpu ???
Here is a screen of z-gpu
Thanks.
-
Known issue, try changing ship's BRC in mission editor... something between like 310-040.
It worked for me !!!
-
flyinj23
open the mission in me and change the multiplayer flag value from 0 to 1 (or vice-versa) :thumbup:
-
Hi, fantastic mission, just one little problem... yesterday we were returning to the Stennis when 2 enemy f-5 attacked us with aim-9 and guns. I managed to land on the deck but one of them strafed me to death just at the parking spot.
I clearly remember that in the previous version of the mission the carrier group was able to self-defend launching missiles to all enemy aircraft closing in... maybe something changed ???
:(
-
Just had the exact problem, me and my wingman were lasing for another flight but after some times at any press of the trigger the laser fired for almost one second and stopped. I tried even shutting off the pod, ri-aligning, change code... anything but no way to make it work again.
After some more time my wingman had the same problem. :(:(:(
-
If you see it fail again can you use check current objective and tell me which target you are looking at? I've tried skip a few times to get different types of targets and I can get the report for all of them so far. When you ran into this issue were you the host?
i clearly remember that the objective in the second time was the "oil processing facility" on Siri Island. :thumbup:
-
Just jumped into dedicated server and the target report is working fine.
If can be of any help it was not a dedicated server, and it happened two times on two, mobile sam the first time and industry second time. Once destroyed the targets i had confirmation of mission success and generation of the new mission.
-
Hi, first of all thank you very much for your fantastic missions :thumbup::thumbup::thumbup:
i only have a problem, when in multiplayer the option "target report" does not work, i mean that i can select it and ask for a report but i have no answer.
In single player it all works right.
L.C.
-
I did some tests too... sa-3 always one shot one kill; sa-6 it always took 2 agm-88 to achieve a kill, the first just damaged it and did not prevented it to fire.
-
yes, it definitley seems that the harm makes too little damage to destroy anything :(
-
Try pushing "L"... i think it's a kind of "master switch"
-
no problem at all, you did a fantastic job on the campaign !!! :thumbup:
if only my wingman wasn't so dumb :pilotfly:
-
eheeh and icls = ch11 :music_whistling::music_whistling::music_whistling:
just one question:
mission1 elint station strike - briefing picture n°2 shows the elint group (ok)
mission2 enemy depot strike - briefing picture n°2 shows again the elint group (not ok)
mission3 enemy ewr strike - briefing picture n°2 shows mozdok airbase and targets, hangars, control tower, ammo storage etc (not ok)
am i missing something ???
anyway very good campaign !! :thumbup:
-
thank you very much !!!
-
Good !!! thank you very much !!!
i'm flying the second mission... i can't find the tacan channel of the stennis... tried all the numbers form 1 to 25 :(
-
yes !! in single player you can set the frequency so that when your wingman responds to your call your adf points to him. The adf can home to any radio transmission and it works. In multiplayer i have some doubts. To make someone home your plane you have to broadcast (talk on the radio) on the correct frequency.
-
Just completed !!! 97% success!!!
Awesome campaign :thumbup::thumbup::thumbup:
-
Same for me, now exiting instant mission: f-18c Vs mig29 and mig21, both in caucasus and nevada, it sends me directly in the main splash screen, without the opportunity of choose fly again/quit or reviewing the scores, shot, kills.
-
Per quanto mi riguarda il "bug" peggiore legato all'illuminazione è che durante il giorno seppur con visibilità nulla le luci di aeroporti e portaerei non si accendono. Durante la notte invece si. Insomma penso che l'illuminazione debba essere legata alle reali condizioni meteo e non al fatto che sia giorno/notte... anche perchè situazioni all'alba o al tramonto sono molto borderline.
O male che vada le farei accendere sempre con la chiamata di avvicinamento.
Comunque ci sono già un paio di discussioni aperte che accennano a questo problema.
-
I think the real problem is that during the day lights never turn on, even in very poor visibility... during the night when calling for landing i never had problems.
-
In ccrp as Sydy wrote is crucial to set the QNH on the plane altimeter equal to the one specified by the mission editor in the weather tab.
In all my mission i set it to 30.30 and once on the plane i set it on the altimeter to match the value... never had precision problems since.
OpenXR
in Virtual Reality
Posted
I'm exactly at the same point....