gillesdrone

Here is the promised video Registration(Inscription) remains to make, to put the mask and the window http://gilles.guesnel.free.fr/video/SAI_Standby.avi http://gilles.guesnel.free.fr/video/SAI_Standby.mp4 Thanks to Takeoff-For-Fun of the forum ED for his its help, by transmitting me its files on the température APU which allowed me to understand lua (at least on this subject ) :)

Thank's Takeoff-for-fun ;) I have make mix between your files and my files , because I hav'nt HeliosExport but I progress , an begin to see how it's made Edit : Yes that's good for Roll ;) when I have finished , I join My Folder Export ;)

this a pics of the interior of my SIA stb if you want other information no Pb Material : ping pong's ball , paper for the horizon maquette , 2 minis servos , 1 Beam of wheel of bicycle and balza wood to fixed thank's for your Script ;)

If you look here http://www.3rd-wing.net/index.php?showtopic=8507&st=130 You will see at the bottom of page and on the following one I made a comment on the forum of my squadron I shall put more detailed photos when I am going to unsettle it to make the inscriptions

please , is it possible you send me your export and other files about your APU ? I want make it too and that see mee how make export nota ; I have not " ExportHelios3rdParty.lua" in my Pc

Thank you very much for your answer I am going to test it this evening, and I inform you , if it works , I hope to realize instruments temperature and oil pressing

thank's for your post , and if you go to France for holiday and if you contact me it is possible to see my pit , no Problem ;) I know an other very good pit builder near my home , BaDCrc :)

Hello, I have make SIA standby panels here : http://gilles.guesnel.free.fr/video/SAIsec.avi I would like to export to the SIOC the values of the SIA of help I got back the variables which I have integral in my siocConfig.lua, no concerns(marigolds) ADISEC = { [1400] = {0,142}, -- AGR_81_Roll [1410] = {0,143}, -- AGR_81_Pitch [1420] = {0,144}, -- AGR_81_sideslip [1430] = {0,145}, -- AGR_81_failure_flag [1440] = {0,599}, -- AGR_81_LongitudinalDeviationBar [1450] = {0,613}, -- AGR_81_LateralDeviationBar I put variables in my SSI Var 1400, name AGR_81_Roll Var 1410, name AGR_81_Pitch Var 1420, name AGR_81_sidesl Var 1430, name AGR_81_failure Var 1440, name AGR_81_Longitu Var 1450, name AGR_81_Lateral When I launch the simulator and the pass on the IOCP console, for Flag not of Pb it crosses 1 has 0 and inverts For other values roll reeling, I pass from 0 to 1 when I tip over, I do not manage to have a 3-digit number for example and to develop it in which file have to I modify the value by multiplying by 1000? In the siocConfig.lua.? In the export .lua And what is the syntax? Thank you for your answer I also found variables to make instruments oil and pressure but same Pb

I have this crash I am server in end of mission with 4 pilotes file join thanks for your answer Gillesdrone http://gilles.guesnel.free.fr/ DCS-20120906-211549.zip

Well I have of to look for in files because not the same that in BS2 DCS World/aircrafts/Ka-50/Cockpit/script/config.lua And correct so: is_EDM = true shape_name = "Cockpit_Ka-50" new_model_format = true v_angle_shift = 0 --- math.rad(11) -- displacement for padlock and helmet and that's Good :thumbup:

In the 3rd-wing we make flightsKA50 A10c and we use frequences R800 VHF2 for the connections KA50 and the datalink and frequence VHF1 R828 on the channel 1 for the liaison KA50-A10c it works very indeed, Thank you for your complementary explanations ;)

Here is the last version of my Pit BS2 Improvements: Less cabling, in spite of what is still visible there is much less, especially at the level of the back connections I put cards SIOC and UBX in panels what makes that I have no more the multiple connections on the back, just the supplies of these cards and the connected cable has the USBcard. The hat of the dashboard is made I found a thumb wheel for the SAI help The collective is now finished any metal for sleeve and mechanism with ceramic brake to manage the hardness The UV26 and the LWS L140 + datalink now stand by the panel superior lights, ease of transport and no cables " floating) The panel R828 is completely fonctional Ark 22, functional under BS1, do not have him(it) here because of a bug of BS2 which will be corrected http://gilles.guesnel.free.fr/video/version2PIT.wmv

No answere ? ...

I have a small problem I have just finished the panelof the ARK 22 (allows to manage the ADF of Ka50) The device ARK 22 for BS1 and BS2 is located " device 46 " Having made SiocConfig.lua and SSI of the SIOC for BS2, that does not work I put just SiocConfig.lua in BS1, and there, inters and switches work... Somebody has you it realized it do panel and work you under SIOC? Because it is the only one that it remains in me not functional, all the rest is operational in the pit... I shall complete the comment this morning with the part SiocConfig, SSI SIoc, and the extract of the clickabledata.lua concerning this device Here is the link to get back my files Http://gilles.guesnel.free.fr/ark22/ Thank you for your assistant; it is a question surement of an error of syntaxe or other but I do not find, either the device has another identity... If somebody sees an error I shall be satisfied to have the answer

Thank you for your answer but exactly I do not know where and how to make this modification before sending it to SIOC

I found parametres for galvanometres but after creation in SiocConfig.lua and SSI, I obtain values 0 or 1. How to obtain values from 0 to 100 to make galvanometres in my cockpit ? I do not know how to or put coéficients. Thank you I join the parts SSI and lua concerned, thank you , in SiocConfig.lua : galva = { [1200] = {0,469}, -- VOYANT hydrolic valv1 [1201] = {0,470}, --VOYANT hydrolic valv2 [1202] = {0,471}, --hydro_common_pressure [1203] = {0,472}, --hydro_main_pressure [1204] = {0,473}, --hydro_acc_brake_pressure [1205] = {0,474}, --hydro_gear_brake_pressure [1206] = {0,475}, --hydro_common_temperature [1207] = {0,476}, --hydro_main_temperature [1208] = {0,252}, --controllers.NeedleOilPressureEngineLeft [1209] = {0,253}, --controllers.NeedleOilPressureEngineRight [1211] = {0,254}, --controllers.NeedleOilPressureGearBox [1212] = {0,255}, --controllers.NeedleOilTemperatureEngineLeft [1213] = {0,256}, --controllers.NeedleOilTemperatureEngineRight [1214] = {0,257} --controllers.NeedleOilTemperatureGearBox in SSI : I have put in display to see if it is correct for display 0 or 1 but in IPconsole I have only 0 or 1 Var 1200, name galv_hydro1, Link IOCARD_OUT, Output 220 // VOYANT hydrolic valv1 Var 1201, name galv_hydro2, Link IOCARD_OUT, Output 221 // VOYANT hydrolic valv2 Var 1202, name compress, Link IOCARD_DISPLAY, Digit 139, Numbers 1 // hydro_common_pressure Panneau arriere Var 1203, name mainpress, Link IOCARD_DISPLAY, Digit 138, Numbers 1 // hydro_main_pressure panneau arriere Var 1204, name Accbrakpres, Link IOCARD_DISPLAY, Digit 137, Numbers 1 // hydro_acc_brake_pressure Var 1205, name brakpress, Link IOCARD_DISPLAY, Digit 136, Numbers 1 // hydro_gear_brake_pressure Var 1206, name commTemp, Link IOCARD_DISPLAY, Digit 135, Numbers 1 // hydro_common_temperature Var 1207, name mainTemp, Link IOCARD_DISPLAY, Digit 134, Numbers 1 // hydro_main_temperature Var 1208, name oilpresL, Link IOCARD_DISPLAY, Digit 133, Numbers 1 // controllers.NeedleOilPressureEngineLeft Var 1209, name oilpresR, Link IOCARD_DISPLAY, Digit 132, Numbers 1 // controllers.NeedleOilPressureEngineRight Var 1211, name oilpresGB, Link IOCARD_DISPLAY, Digit 131, Numbers 1 // controllers.NeedleOilPressureGearBox Var 1212, name oilTempL, Link IOCARD_DISPLAY, Digit 130, Numbers 1 // controllers.NeedleOilTemperatureEngineLe Var 1213, Link IOCARD_DISPLAY, Digit 129, Numbers 1 // controllers.NeedleOilTemperatureEngineRi Var 1214, name oilTemGB, Link IOCARD_DISPLAY, Digit 128, Numbers 1 // controllers.NeedleOilTemperatureGearBox

I have Finished the part encoders, which in the simu allows to make potars and rotary selecteur with push (typify push button ABRIS and SAI) Here is the small video http: // gilles.guesnel.free.fr/video/encodeurs.wmv The interet for those who do not master the SIOC or the prog, this card is recognized as a joystick and thus regle with the inputs of the simu

Hello, I shall want to realize the galvanometers of pressure oil and t °, 12 all in all, but when I create the variable in SSI I have only a variation from 0 to 1 in the IPconsole of Sioc, somebody knows how to or find variables to make the modification of coefficient? I tried in mainpanel-init.lua but it does not work thank's for your answer

+1

+1

I have finish the script for frequency datalink // ************************************************** *************************** // * Config_SIOC ver 3.5 - By Manolo Vélez - http://www.opencockpits.com // ************************************************** *************************** // * FileName : datalBISk.txt // * Date : 13/01/2011 Var 0110, name SIOCKEY, Link KEYS // EMULATEUR KEYS { &SIOCKEY = 0 } Var 0117, name freqdata2 // INIT DIGIT 2 freqdata { &CENTMIL = &CENTMIL } Var 0118, name freqdata3, Value 0 // LINK 3 freqdata Var 0119, name freqdata4, Value 0 // LINK 4 freqdata Var 0121, name freqdata6 // INIT DIGIT 6 freqdata { &CENTIEME = &CENTIEME } Var 0123, name INIFREQDAT, Link IOCARD_SW, Input 4 // SWITCH FREQ DATA reinit { IF &INIFREQDAT = 1 { &CENTMIL = 12 &MILLE = 7 &CENTAINE = 5 &CENTIEME = 0 } } Var 0125, name CENTMIL, Link IOCARD_DISPLAY, Digit 205, Numbers 2 // AFFICHEUR FREQ DATA CENTMIL Var 0126, name MILLE, Link IOCARD_DISPLAY, Digit 204, Numbers 1 // AFFICHEUR FREQ DATA MIL Var 0127, name CENTAINE, Link IOCARD_DISPLAY, Digit 203, Numbers 1 // AFFICHEUR FREQ DATA CENTAINE Var 0129, name CENTIEME, Link IOCARD_DISPLAY, Digit 201, Numbers 2 // AFFICHEUR FREQ DATA CENTIEME Var 0130, name FRQDAT3_SW, Link IOCARD_SW, Input 114 // SWITCH FREQ DATA MIL { IF &FRQDAT3_SW = 1 { IF &MILLE <= 9 { &SIOCKEY = 12 &SIOCKEY = 0 &MILLE = &MILLE + 1 } ELSE { &MILLE = 0 } } } Var 0131, name frqdata1, Link IOCARD_SW, Input 115 // switch freq data CENTIEME { IF &frqdata1 = 1 { IF &CENTIEME <= 75 { &SIOCKEY = 23 &SIOCKEY = 0 &CENTIEME = &CENTIEME + 25 } ELSE { &CENTIEME = 0 } } } Var 0132, name FRQDAT4_SW, Link IOCARD_SW, Input 108 // SWITCH FREQ DATA CENTAINE { IF &FRQDAT4_SW = 1 { IF &CENTAINE <= 9 { &SIOCKEY = 11 &SIOCKEY = 0 &CENTAINE = &CENTAINE + 1 } ELSE { &CENTAINE = 0 } } } Var 0133, name frqdata2, Link IOCARD_SW, Input 113 // switch freqdata CENTMIL { IF &frqdata2 = 1 { &CENTMIL = &CENTMIL + 1 // On incrémente de suite, sans envoyer IF &CENTMIL < 15 // Tant que CENTMIL<15 { &SIOCKEY = 24 // on envoie la commande &SIOCKEY = 0 } ELSE { IF &CENTMIL < 22 // Sinon, si <22 dans ce cas on saute à 22 { &CENTMIL = 21 // et SEULEMENT APRES on envoie &SIOCKEY = 24 &SIOCKEY = 0 &CENTMIL = &CENTMIL + 1 // rajout de cette ligne sinon pas d'increment } ELSE // Sinon, si CENTMIL >22 alors { IF &CENTMIL < 40 // Tante que CENTMIL <50 { &SIOCKEY = 24 // envoyer la commande appropriée! &SIOCKEY = 0 } ELSE // Sinon, si CENTMIL>49 { &CENTMIL = 10 // On repasse à 10 &SIOCKEY = 24 // et on envoie la commande &SIOCKEY = 0 } } } } }

my framerates are 25 to 35 fps with the shkval and abris and SIOC the Dashboard is expoted to an other PC ( portable asus G2 )

I have make ssi for datalink the video : I did not make the programming on hundred and thousand because I have a probleme for the jumps of 14* *** in 22* *** and for contiunuer until 39* *** But that makes 400 combinations of frequences for the moment, it is enough I think:) I take advantage of it to give you the link of the video of the LANXII of the 3rd-wing the ssi and txt script : datalink.zip datalink.txt

I have use the function (SimpleRotaryTest) and that's good :) so I did not change the other functions.

Thank you for your patience, I was very vague and I apologize for it Has to look for the error which I had made " I walked round " It works good now, ;-) I had from the beginning to forget a comma at the end of line in siocConfig.lua Still thank you