meisterolsen

We can make the profile longer but it will cost a bit extra. I will answer your email later today. I don't think stability will be a problem even with 10cm more.

Spacers is a possibility but we don't have good ones at the moment. We tried 4cm long ones but the mount became unstable. I think 2cm spacers is the maximum to go. The clamp already has a 1cm space to the profile, plus 2cm spacers would create a 3cm space from the profile to the clamp. 7,5cm in the height is no problem. I will try to find some good spacers but it will take a while.

We made a little fotoshoot yesterday with the mounts and all mounting plate variations.

Looking great! First time I have seen the upside down configuration, good idea. The great thing about these profiles is that you an modify or add anything you would like to them. We always appreciate feedback, good or bad. Thanks a lot! And very cool pedals by the way. I hope Slaw gets back to producing them soon, I really want to get a pair. How do you like them? Yesterday I finished a first draft/layout for the instruction manual, what do you guys think? Everything easy to understand?

We are currently working on a complete relaunch of our sim rigs. We already made a few prototypes for deticated flight rigs. They are super awesome and work great so far. I hope to be ready with the design in the next few weeks. Here are a few images of the prototype: And this is for center mounting.

A little production update again: We have gotten a new shipment of black mounts in. 25 pieces each for Warthog joystick and throttle are now available. https://www.monstertech.de/en/product/joystick-hotas-table-mount/ We are still a bit behind on table mounts orders but we will finally get the last missing mounting plate (Logitech G940) in this week. Our plan is to clear the whole order book this week. Also the flight stand is available for pre-order since today. https://www.monstertech.de/en/product/flight-stand/ Here are a few picture of the newest version.

We are having some delays with silver mounting plates at the moment. The last batch of watercutting took 6 weeks. We will get new silver Warthog and X55 plates in on thursday, then we can ship most of the open orders. Here is a look at the new plastic under the top plates. Big improvement to the old solution we used. All current orders have been shipped with the new ones. I also added them as a replacement to the website: https://www.monstertech.de/en/product/protector-for-table-mounts-replacement/

Thanks for the great reviews. We are always happy to get feedback, good or bad. We are actively working on the packaging. We recently switched to double packaging everything. So padded carton into another padded carton. That should improve shipping security alot. We thought about including hex keys to every order but we would have to raise the price of the products for that. We decided it makes more sense to offer them optional because a lot of people already have a hex key set at home. (They are for sale in the shop) I will try to make this more clear on the product page. Olsen

A few pictures of the mounts with black anodizing. At the moment only Warthog are available in black and there an not many left in the currect production batch. Our plan is to make mounting plates for every system in black available but that will take some time.

Hi no worries guys. My colleague Marc was on holiday last and this week, so we could not send out that many. Next week we are back to full speed and will fullfill every order we can. Normally we ship in at least 2 weeks after ordering, often much faster. If it takes too long or you are not happy with the mounts, just send them back and we will refund the money. We have shipped over a thousand mounts at this point and we did not get one back yet. I am quite happy about that.

Here is another short production update. We are using new plastic under the top plates of the mounts. The new one is much thinner and harder than the plastic we were using. The plastic coating gives more grip to the mounts and protects the table from scratches. Also it improves the stability of the mounts even more, which is really cool! Here are a few pics:

We just got a new prototype mounting plate in. This one is for the Saitek X65F. The radial longholes are to enable angle adjustment for joystick and throttle. The plates can be quite short because the X65F stick has no movement.

Very nice video. Try adjusting the pressure of the clamps a bit more. These are industrial grade and do not break. There is a little knob on the clamp that adjusts the pressure. Also its good to adjust the height of the clamps in the back perfect to your table. That should get rid of most of the movement you see.

Thanks, we are doing our best. :) No Problem ;)

The mounts have a vertical adjustable range of about 22cm. If you need a longer one write it in the order notice, maybe it will cost a few Euros more but I will get back to you on that then. At the moment we are not planning sets. Because we have so many versions of the mounting plates it's quite a challenge to keep everything organized now. If we would offer sets it would double the versions. Also in the next few weeks black versions will go online which will make everything even more complicated backend wise. The mounting plates are available seperatly and are easily changend. You just have to loose two screws and you can switch them out. The idea is you only have to buy the mounts one and can use them with every new joystick/throttle system. We are already working on new plates for the upcoming Thrustmaster and VKB systems.

We do have specialised plates for the X55. They look similar to the Warthog throttle plate just in the size of the X55 joystick and throttle. On a side note: If you are a Star Citizen backer you can read a bit more about the mounts here: https://forums.robertsspaceindustries.com/discussion/271104/project-aluminium-hotas-joystick-table-mount/

Here are two more pictures of the mounts attached to a desk. Forgot them in the first post.

Hey send us an email to info@monstertech.de about the table mount without a mounting plate. I will have to calculate a price for that. Shipping will probably be about the same the plates are not that heavy.

Hey guys, some of you might have seen our table mounts before but I wanted to make a thread here to get more feedback from the DCS community. The table mounts are made out of anodized aluminium. The top and mounting plates are also anodized. We have specialised mouting plates for all current systems. We always try to improve the design more and the best way is just to listen to user feedback. If you have some ideas or critique to improve the design please let us know. You can find some build videos on our YouTube Channel: Monster Tech Channel Our website: http://www.monstertech.de/en/ Table Mounts video introduction with Thrustmaster Warthog HOTAS: A review of the desk mounts by Snake Eater. Cheers Olsen