pierre chassang
-
Posts
34 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by pierre chassang
-
-
Hi,
Since the build 10872 is installed, I get no more RWR, CMPS, CMSC, Clock, And UHF frequancy and channel on my second screen.
Would you have a look at this.
Worked fine with previous build.
Best regards
Pierre
-
BFT09 performed successfully.
I think the problem was my turns was not so banked then I get out the trigger zone.
Please enlarge them a little bit.
-
What was reason given for the termination?
Looks like you missed a trigger zone somewhere on the flight path - make sure you hit all the waypoints to ensure the trigger zones are entered.
Thanks,
I'll try today and report...:thumbup:
May be you could enlarge the trigger zones a little bit.
-
Hi,
I got an isue with BFT09.
After going around, I climb to 120, angel 7, 260 kt, then I turn to 040 angel 7, 260 kt, then turn to 300, angel 7, 260 kt.
After that no more message from instructor.
I get myself at 55 NM from airport and If I try to ask vector at Batumi, instructor says "terminate, terminate... etc".
What goes wrong.
I'm using latest DCS world 1.5.7.10175.
See pictures attached
-
Please, see thread:
https://forums.eagle.ru/showthread.php?p=3258949#post3258949
for more information.
Best regards
-
-
The problem is that no L-engine occurs during the flight even if I set the probability to 100%.
Any idea?
-
Of course, may be because the failure is not really triggered.
-
Hi,
I set a Hydraulic failure in the mission planner at 15 min, during 5 minutes and 100% probability.
In the debriefing, the failure is present, but not in the cockpit.
No warning and no pressure lost during the flight.
What I did wrong
You can see screenshots here:
https://forums.eagle.ru/showthread.php?t=194252
Forgot to say: Random failure work, only manual ones.
Thanks for help:helpsmilie:
Pierre
-
Oh Ok!
I will post there.
Thank you.
-
The .miz file is attached,
A left engine failure should happens in 5 minutes after TO.
I've added 2 screenshots:
Capture is the debreifing showing the failure.
Capture2 shows the aircraft without failure (took after the 1st):cry:
Please help
-
Hi,
That's what I did, I set the failure into the mission builder and saved the mission.
The failure appears into the debriefing but nothing happens in the aircraft.
Any idea?
-
Hi,
I set a Hydraulic failure in the mission planner at 15 min, during 5 minutes and 100% probability.
In the debriefing, the failure is present, but not in the cockpit.
No warning and no pressure lost during the flight.
What I did wrong
Thanks for help
Pierre
-
Hi,
I'm using 2 monitors
DCS World latest + A10C)1-23" touch screen Acer.
2-24" LG monitor.
Both are 1920x1080.
I created a MonitorSetup file to get cockpit on the right screen (non touch screen) and nothing on the touch screen (In the goal to install Helios cockpit)
Here is the file content:
But, when launching DCS, (1.5.7), The first splash screen is splited over the 2 monitors and then the GUI is on the right monitor._ = function(p) return p; end;
name = _('TEST A10c');
Description = 'TEST A10c'
Viewports =
{
Center =
{
x = 1920;
y = 0;
width = 1920;
height = 1080;
viewDx = 0;
viewDy = 0;
aspect = 3840/1080;
}
}
--//////////////////////////////////////
-- Eagle Dynamics A-10C =
--//////////////////////////////////////
ED_A10C_LEFT_MFCD =
{
x = 71;
y = 123;
width = 445;
height = 445;
}
ED_A10C_RIGHT_MFCD =
{
x = 1410;
y = 126;
width = 445;
height = 445;
}
ED_A10C_RWR =
{
x = 597;
y = 152;
width = 194;
height = 194;
}
ED_A10C_CLOCK =
{
x = 473;
y = 825;
width = 131;
height = 131;
}
GUI =
{
x = 1920;
y = 0;
width = 1920;
height = 1080;
viewDx = 0;
viewDy = 0;
}
UIMainView = GUI
The problem is the left monitor remains black and I can't display the MFCD's on it.
When DCS is OFF I can see the MFCD on the left screen.
Would you tell me what I'm doing wrong?
Best regards
Pierre
-
Thanks for reply.
Best regards
Pierre
-
two screenshots to illustrate my previous post
-
Hi,
I'm using 2 monitors:(DCS World latest + A10C)
1-23" touch screen Acer.
2-24" LG monitor.
Both are 1920x1080.
I created a MonitorSetup file to get cockpit on the right screen (non touch screen) and nothing on the touch screen (In the goal to install Helios cockpit)
Here is the file content:
_ = function(p) return p; end;
name = _('TEST A10c');
Description = 'TEST A10c'
Viewports =
{
Center =
{
x = 1920;
y = 0;
width = 1920;
height = 1080;
viewDx = 0;
viewDy = 0;
aspect = 3840/1080;
}
}
--//////////////////////////////////////
-- Eagle Dynamics A-10C =
--//////////////////////////////////////
ED_A10C_LEFT_MFCD =
{
x = 71;
y = 123;
width = 445;
height = 445;
}
ED_A10C_RIGHT_MFCD =
{
x = 1410;
y = 126;
width = 445;
height = 445;
}
ED_A10C_RWR =
{
x = 597;
y = 152;
width = 194;
height = 194;
}
ED_A10C_CLOCK =
{
x = 473;
y = 825;
width = 131;
height = 131;
}
GUI =
{
x = 1920;
y = 0;
width = 1920;
height = 1080;
viewDx = 0;
viewDy = 0;
}
UIMainView = GUI
But, when launching DCS, (1.5.7), The first splash screen is splited over the 2 monitors and then the GUI is on the right monitor.
The problem is the left monitor remains black and I can't display the MFCD's on it.
When DCS is OFF I can see the MFCD on the left screen.
Would you tell me what I'm doing wrong?
Best regards
Pierre
-
Pour résumer, l'écran tactile ne peut-être à la fois principal et tactile...
-
Bonjour,
J'ai installé Helios sur ma machine, qui comprend 2 écrans:
1 - Acer tactile 23"
2 - LG non tactile 24"
Les 2 sont en 1920x1080.
Mon problème est que je ne parviens pas à ouvrir DCS world sur l'écran non tactile.
Il s'ouvre toujours sur l'écran tactile derrière le panneau Hélios.
Si je change l'écran principal pour le non tactile, un touché sur le tactile est reporté sur l'autre écran.
Auriez vous une solution à me proposer?
Merci
Cordialement
Pierre
-
Hi,
Just received mine today:
Stick and throttle #62613
-
-
Thanks Sabre-TLA for tip.
My TM Wathog HOTAS should be delivered next week, I think it will be better than my old Saitek Cyborg EVO and will help me to improve my skill.
Cheers
Pierre
-
Thanks for reply, but the instructors doesn't let me time to accelerate as he commands to me "040 angel 7 at 260" before starting Immelman..
-
Hi all,
The Basic qualification missions are awesome.
I have huge troubles with mission #7 aerobatics.
It is impossible to perform an Immelman at 260/280 kt. The aircraft stall before it is inverted.
Furthermore, when I try to increase speed to 300/310 kt (best speed to start Immelman), the instructor says "failed to perfom.." before starting the figure.
any idea (tips) to pass the mission #7 successfully?
Cheers
Pierre
DCS World latest + A10C)
Export.lua issue with (10872)
in Release Version Bugs and Problems (Read only)
Posted
Found solution, a few lua files modified for Helios have been overwritten by update.
Fortunately a backup_xxx folder is created at update and the old files can be easily reset.
Don't forget the exports.lua which has no backup.
Best regards
Pierre