Jump to content

Chris91

Members
  • Posts

    16
  • Joined

  • Last visited

  1. Salut , Test 1 Valve Index Detailed review en français http://www.checksix-forums.com/viewtopic.php?f=468&t=205550 Test 2 Valve Index in Dcs World setting SS http://www.checksix-forums.com/viewtopic.php?f=468&t=205573
  2. Salut, I received the Valve Index a week ago. and it's great compared to my Lenovo Explorer headset. herer my test http://www.checksix-forums.com/viewtopic.php?f=468&t=205550
  3. Merci Robin, tes explications ont réglé le problème et j'ai réussi dans DCS à avoir toutes les fonctions OK. Par contre, sous w10 j'avais un autre problème, c'est que le CMCC dans la barre de tâche, affichait une fois sur 2 ou 3 .. c'était alléatoire. mais les icones Direct et Mapped 'ETAIENT GRISEES' donc impossible d'avoir un mode prêt pour le jeu. et bien sur çà ne fonctionne plus quand c'est 'gris' les icones. j'ai cherché sur internet et j'ai trouvé la solution, que je poste en détail sur ce post afin qu'il soit utile à d'autres.
  4. Robin :) , J'ai désinstallé CH manager et réinstallé refait le fichier.map, et j'ai lancé CM control center en sélectionnant 'mapped'. dans Dcs il est maintenant reconnu. Ce n'était pas mon fichier 'map' qui était en cause. Par contre il y a une belle anomalie me semble t'il. je vous met mon fichier en zip. les cdes que j'ai placé en mode 1-2-3 répondent correctement dans DCS. Mais il y a problème avec la cde : Trim reset - stationnaire et CH ou DCS. (si je fais le raccourci sur le clavier dans dcs çà fonctionne). Dans dcs 'menu des cdes' observez sur l'image tout en haut à droite colonne CH il est indiqué Joy_'BTN3. or dans CH manager çà correspond au bouton 14 et j'ai 32 boutons. Sur l'image Dcs il n'y a que 12 boutons et des POV. CH control 'ou Dcs' n'affiche pas le nombre exact de bouton prévu dans CH control manager soit 16 ou 32. le bouton '3' indiqué par Dcs fonctionne pour le trim 'uniquement', mais les autres fonctions (de ce même bouton) trim reset et stationnaire figurent sous le même bouton : btn3 dans le menu DCS et ne fonctionnent donc pas. Toujours dans le menu DCS, si j'appuie sur les mêmes boutons avec les 3 modes, chaque fonction est visible dans DCS et bien reconnue. Le problème du BTN 3, ne me semble pas normal, est-ce un bug DCS, devrai-je le faire remonter ? Chris_Ka50.zip
  5. Robin, Merci beaucoup vos explications et votre fichier devrait m'aider. Je n'avais effectivement pas bien compris le mode 'maped' et le manuel trouvé sur C6, fais l'impasse sur ce mode, sans donner d'infos précises. Le mode décalage est intéréssant, mais les 3 modes classique vont me suffire amplement. Je vous tiens au courant. :thumbup:
  6. Jross thanks, Which process should I disable in W10? Robin thank you, I tried both modes 'direct' and 'maped' without success! I put you my profile which is 'just' a test, it was to check that everything worked (which is not) it's the only CH control manager profile I have. because I use the warthog for the throttle. But to drive the helicopter I need a more flexible joy and CH is fine, Finally if I can make this profile work. thanks a lot for your help Christy. CH.zip
  7. Thank you for your response, but it does not answer my problem at all. Since I say in the post, that the shortcuts programmed in CH manager, do not work in DCS, and I do not understand at all the reason.
  8. Bonjour Avantar Thank you very much for this great soft :thumbup: Personally I have a joy CH products and their soft Control Manager, which allows to assign at least 3 functions to the same button, and that's enough for me (the maximum possible being 32 ..) Mais çà ne fonctionne pas sous DCS ! To do this the joy has a button 'mode' and each time it turns on my joy a led (there are 3) this just to explain its operation. Does your soft, can allow to assign several functions (3) if possible to the same button, assigning a button 'for mode change'. I hope that the French / English translation will be understandable. Thank you for your great work.
  9. thank you, I will see this topic. Very nice.
  10. Hi, I left my joyctik Figheiterstick of CH Products because to drive the helicopters it is much more flexible and I pilot much more easily as well. But .. does DCS World 2.5+ work with CM Control Center v4.55? Because I created a profile allowing me to assign 3 functions to each button. But in DCS it does not work. On the other hand if I assign the buttons directly in the control panel of DCS, a button = 1 function there no problem here works. Merci pour votre aide.
  11. Thanks for your advice :-) I do not think that the problem comes from my window for the following reasons. - My IPD was 29 left and 30 right and in the VR menu I put: 30, while it was 57! after this change I saw a clear improvement. And by using the center, up, down, right, left button I can now see everything correctly. On the other hand I would like to know if you have with your helmet in the cockpit, do these settings too?
  12. Hello, Thank you for responding, to my left I have a window about 2 m from my seat, what should I do?
  13. Hello, I start in VR with a Lenovo Explorer helmet, buy used but still under warranty. I can not tell if the problem below is a headset or DCs problem or bad trimming on my part. I test in the FA18, and turning my head to the console on the left, I see only the throttle! I try to force my head to the left, but I do not see the other buttons, it looks like the view is blocked. The right console I do not have this problem. Thanks for your help.
  14. Salut, Is there a trick for DCS to display the frame of the flight controls (RCRTL + enter) and he is not placed on the central screen, because in triple screen it appears on a screen on the left and on the video, of course he is not visible. I use Shadowplay for video. Do you have a solution ? Merci
×
×
  • Create New...