NikkiC4

I've been performing some tests. I don't hear a USB disconnect sound. I had set the force in the BrunnerDX application to 80 and this allows a maximum of 3 seconds of full elevator deflection (in a turn fight) before cutting out with: 29.12.2021 at 16:33:38 Error Force Sensor @ Elevator(2) 29.12.2021 at 16:33:38 Error Over Current @ Elevator(2) I see the temperature shoot up during that time. Setting force to 60 seems to allow an indefinite peroid of time for full elevator deflection. I may be able to get away with more force, so will test further. I'm not sure what unit of force is being used in the slider going from 0 to 150. This was after I upgraded the firmware from v560 to v574. The other issue looks like the auto-leveller being enabled, as suggested by Lynchsl62.

The explanation for the first issue explains a lot! My brother and I were running out of game time, so we started missions in-flight. I did get around it by forcing a disconnect and reconnect precariously during those flights. I can't actually recall whether I heard a USB disconnect sound. I will try to repeat the issue tomorrow today, Christmas day! Thanks for your hard work on your wonderful program. It adds a lot of immersion, even on a 6 DOF motion platform. No extension being used.

Hi, Is anyone using BrunnerDX for IL-2? It mostly works. I get a lot of unexplained lack of force feedback in the pitch axis at the start of flights. Another similar issue is an immediate disconnect and reboot of the CLS-E during a hard pull-up during turn fighting. As if it can't provide enough current. The CLS-E then tries to perform a calibration in-game, whilst trying to fly, hence the homing error. I don't think this is an overheating issue, as before the disconnect little force was being applied. The force is set to 80 in the BrunnerDX application. Here's the log output. 23.12.2021 at 21:40:13 Connecting to HW via USB HID 23.12.2021 at 21:55:36 Error @ Elevator(2) 23.12.2021 at 21:55:36 Error Force Sensor @ Elevator(2) 23.12.2021 at 21:55:36 Error Force Sensor @ Elevator(2) 23.12.2021 at 21:55:54 Homing Error Current Limit2 @ Elevator(2) Anyone with similar experiences?