airdoc Posted July 29, 2014 Posted July 29, 2014 Hi all Currently, DCS lets you assign a single button to a standard FOV and use 2 additional buttons to increase/decrease FOV. Going through a thread about snapviews, i wondered if there is a way to assign 3 buttons for 3 different FOVs, so that the switch between normal-zoomed in-zoomed out would be instant (i.e. 30 degrees - 80 degrees - 100 degrees). Any help is appreciated thanks The three best things in life are a good landing, a good orgasm, and a good bowel movement. The night carrier landing is one of the few opportunities in life to experience all three at the same time.
JulienBlanc Posted July 29, 2014 Posted July 29, 2014 Currently I know of two default snapviews which can be switched from with the num keys, one which is orientated towards the HUD, the second one being orientated towards the instruments. You can adjust each of these default snapviews in the LUA or by saving them once configured IG with Ralt+num0 [sIGPIC][/sIGPIC] Gigabyte GTX 970 G1 Intel i7-4790K 4GHz H100i 256 GB SSD + 1TB HDD Crucial+ WD Blue 16 Gb Ram DDR3-1866-C9R Mhz Veng. Pro. GA-Z97X-G5 SuperNova 750 G2
airdoc Posted July 29, 2014 Author Posted July 29, 2014 thanks for replying JulienBlanc, is it possible though to adjust the LUA files so that when you use the snapview key only the FOV will change and not the direction? The three best things in life are a good landing, a good orgasm, and a good bowel movement. The night carrier landing is one of the few opportunities in life to experience all three at the same time.
JulienBlanc Posted July 31, 2014 Posted July 31, 2014 I don't think so, then again I'm no specialist in the matter... To be confirmed [sIGPIC][/sIGPIC] Gigabyte GTX 970 G1 Intel i7-4790K 4GHz H100i 256 GB SSD + 1TB HDD Crucial+ WD Blue 16 Gb Ram DDR3-1866-C9R Mhz Veng. Pro. GA-Z97X-G5 SuperNova 750 G2
Recommended Posts