Weegie Posted November 16, 2015 Posted November 16, 2015 I'm making up some profiles in Target and not familiar with the SU 27. The question is according to controls "F" = Flap toggle "SHFT F" = Landing Flaps "LCTRL F" = Flaps Raise When looking in F2 External view I cannot see any difference between Landing Flaps and Take Off Flaps Toggling "F" merely raises and lowers them to the same position by the looks of it. Is it a graphics bug and I still need to use "LSHFT F" when on approach or is only one flap position modeled? Sorry for newbie question, any other comments that might enlighten me would also be welcome
ShuRugal Posted November 16, 2015 Posted November 16, 2015 The keybindings are probably in error: the real Su-27 only has two positions available to the pilot for flaps. If you look under the throttle, you will see a blue button in front of an orange one. the blue is "flaps up" and the orange is "flaps down". That said, the ACS has more selective use of the flaps based on airspeed. I never deploy the flaps manually for takeoff, I just let the ACS set the appropriate angle.
Santi871 Posted November 16, 2015 Posted November 16, 2015 The F is just a toggle, so whenever you press it the flaps will change states. The Landing Flaps and Flaps Raise bindings only work if you press the opposite to the current state. It's for selectors and toggle switches in joysticks.
ekg Posted November 16, 2015 Posted November 16, 2015 Can someone confirm that the Su-27 has only two positions basically up and down?
Weegie Posted November 16, 2015 Author Posted November 16, 2015 Thanks for the replies, interesting and given me food for thought. It still leaves me a bit confused. Now I believe the ACS can be disabled (I think) if it can I'll try that and then select the flaps to see if it makes any difference. I suppose its possible the ACS is overriding my selection. If I manage to do this I'll post back up with the results. The idea of letting the ACS sort out the flaps is a really useful nugget, appreciated.
Weegie Posted November 16, 2015 Author Posted November 16, 2015 So I pressed "S" which operates ASC Direct control and threw a lever in the left side of the cockpit. Operated the flaps and exactly the same result. So it would appear there are only 2 positions, this is also borne out by the blue and orange buttons, one press of "F" presses one of the 2 buttons and pushes the other, toggling "F" again does the reciprocal. So I can only ASS-ume that only one flap setting is modeled in the sim. I'm willing to be proved wrong if anybody else knows different
Santi871 Posted November 16, 2015 Posted November 16, 2015 So I pressed "S" which operates ASC Direct control and threw a lever in the left side of the cockpit. Operated the flaps and exactly the same result. So it would appear there are only 2 positions, this is also borne out by the blue and orange buttons, one press of "F" presses one of the 2 buttons and pushes the other, toggling "F" again does the reciprocal. So I can only ASS-ume that only one flap setting is modeled in the sim. I'm willing to be proved wrong if anybody else knows different Wait, I'm not sure what point you're trying to prove. There are only two flap positions, raised and landing, but the ASC can automatically set the flaps inbetween those (for example for takeoff).
Weegie Posted November 16, 2015 Author Posted November 16, 2015 Ok I do know its got the leading edge slats too controlled by ASC I'm talking about the normal Flaps at rear of the wing. So as to be concise that there is no understanding As far as I can see there is 1 flap setting that is 2 positions Position 1 Retracted (i.e. the flaps are in the same horizontal plain as the wings) effectively flaps up or no flaps Position 2 Flaps down, drooping providing extra lift. Maybe I've got the terminology wrong but my understanding of 2 flap settings available would mean the flaps have 3 positions 1) Retracted 2) X degree of droop eg: takeoff 3) Y degree of droop eg: landing Where Y>X Please educate me if I've got it wrong, as I understood the SU 27 had 2 flap settings, take-off/combat & landing. I can only see one setting in the sim Its not a huge deal but if I know then I can bind my controls correctly
Weegie Posted November 16, 2015 Author Posted November 16, 2015 Ahhhh Ok I re-read So there is no manual take-off setting you simply use the flaps for landing. ASC takes care of the rest, thank you that answers the conundrum then Thanks, very much appreciated
Weegie Posted November 16, 2015 Author Posted November 16, 2015 Santi and ShruRugal Thanks very much for taking the time to spell it out
ShuRugal Posted November 17, 2015 Posted November 17, 2015 Can someone confirm that the Su-27 has only two positions basically up and down? There is a link to an old article in this thread where the chief editor of Aviation Weekly got to fly a Su-27 in 1990. He states that "There is only an up and down button on the flaps, with no intermediate settings".
Weegie Posted November 17, 2015 Author Posted November 17, 2015 Oh a bonus read too Interesting reading so far Once again many thanks
Recommended Posts