frogger Posted March 20, 2016 Posted March 20, 2016 hi guys , just after some advise. i have the leo bodnar Bu0836 board and im collecting old broken car stereos for the rotary encoders used for volume control. i wired one up today and used the encoder software on leos site and it works however if i turn the rotary clockwise for eg. and buttom 2 is pressed in pulses i also get random button 1 presses in there. almost always when i change direction. so basicly what im wondering is if it is due to a damaged encoder or just a cheap one. or is this something that is caused by not setting up the software properly. cheers frogger
Sokol1_br Posted March 20, 2016 Posted March 20, 2016 (edited) Like pot's - have linear, logarithimic... types, encoders can have different code types and operation mode. Some about here: http://simhq.com/forum/ubbthreads.php/topics/4148062/need_help_with_leo_bodnar_bu03#Post4148062 http://svglobe.com/arduino/input_enc.html http://arduino.svglobe.com/ardsim_en.html Edited March 20, 2016 by Sokol1_br
Recommended Posts