Lorenzo.D Posted August 18, 2016 Posted August 18, 2016 Buongiorno ultimamente sto studiando questo modulo...sto seguendo la guida di chuck e sto seguendo sul forum il thread riguardante gli update. Ho creato una missione con il jtac come suggerito nella guida...il jtac risulta nel menu radio ma non risponde nonostante la radio settata sulla frequenza inserita nel me. Nei comandi hotas ce ne sono 2 riguardanti la selezione delle 2 radio ma nonostante la frequenza settata e visibile anche nel pannello frontale dell'aereo e la modalità impostata su manuale non riesco a ricevere risposte... Ho provato lo squelch e il rumore si sente quindi la radio è accesa. Sul pannello frontale sono visibili le 2 frequenze disponibili impostate dal pannello radio. Premendo i tasti sull hotas di selezione delle radio vedo un led verde illuminarsi nel pannello frontale a fianco delle suddette frequenze o sopra o sotto in base alla radio selezionata ma niente nessuna risposta. Le uniche istruzioni che trovo in giro riguardano il mettere la radio su manuale e selezionare a mano la frequenza. Inviato dal mio ASUS_Z00LD utilizzando Tapatalk
chromium Posted August 18, 2016 Posted August 18, 2016 quando necessiti supporto per situazioni in cui c'entra qualcosa che hai aggiunto tu, tipo JTAC, è meglio se posti la missione in allegato di modo che chi può (io no, al momento) possa verificare se il problema non sia lì invece che nella procedura che usi. Al momento non posso essere di maggiore supporto. Author of DSMC, mod to enable scenario persistency and save updated miz file Stable version & site: https://dsmcfordcs.wordpress.com/ Openbeta: https://github.com/Chromium18/DSMC The thing is, helicopters are different from planes. An airplane by it's nature wants to fly, and if not interfered with too strongly by unusual events or by a deliberately incompetent pilot, it will fly. A helicopter does not want to fly. It is maintained in the air by a variety of forces in opposition to each other, and if there is any disturbance in this delicate balance the helicopter stops flying; immediately and disastrously.
Lorenzo.D Posted August 18, 2016 Author Posted August 18, 2016 Come torno a casa da lavoro la allego. Inviato dal mio ASUS_Z00LD utilizzando Tapatalk
Lorenzo.D Posted August 18, 2016 Author Posted August 18, 2016 (edited) ciao ho messo in allegato la mix per la 1.5 beta e sono riuscito a contattare atc e tanker...solo con il jtac ho problemi. Mi è spuntato anche un errore nel me m2000c jtac prova.miz Edited August 18, 2016 by Lorenzo.D
Lorenzo.D Posted August 18, 2016 Author Posted August 18, 2016 ho risistemato la mix e risolto l'errore laser(avvicinate truppe nemiche al jtac)...ho provato a cambiare frequenza radio jtac ma niente...nuova versione mix allegata [ame] [/ame] video suggerito nella guidam2000c jtac prova.miz
Lorenzo.D Posted August 20, 2016 Author Posted August 20, 2016 Qualcuno ha potuto provare? Inviato dal mio ASUS_Z00LD utilizzando Tapatalk
chromium Posted August 20, 2016 Posted August 20, 2016 Qualcuno ha potuto provare? Inviato dal mio ASUS_Z00LD utilizzando Tapatalk io non posso fino almeno almeno alla prima di settembre, prova casomai sul forum inglese se qui son tutti in ferie ;) Author of DSMC, mod to enable scenario persistency and save updated miz file Stable version & site: https://dsmcfordcs.wordpress.com/ Openbeta: https://github.com/Chromium18/DSMC The thing is, helicopters are different from planes. An airplane by it's nature wants to fly, and if not interfered with too strongly by unusual events or by a deliberately incompetent pilot, it will fly. A helicopter does not want to fly. It is maintained in the air by a variety of forces in opposition to each other, and if there is any disturbance in this delicate balance the helicopter stops flying; immediately and disastrously.
Majinbot Posted August 21, 2016 Posted August 21, 2016 Hai ragione non c'era verso di farla funzionare, poi l'ho rifatta da zero (in fretta) e adesso funziona. Puoi modificarla per rimettere tutto al suo posto.m2000c jtac prova2.miz PC: i7-13700K - Gigabyte RTX 5080 GAMING OC - 64GB DDR5 6400 - VPC MongoosT-50CM3 - VKB GF pro - MFG Crosswind - Msi MPG321UR-QD + LG OLED 32GS95UE - TrackIR5 - Quest 3
giaco1 Posted August 21, 2016 Posted August 21, 2016 Si la tua non funziona non so perchè. ne ho fatta una mia ed è tutto OK! Strano la tua sembrava tutta ok nel editor, va capire che strana combinazione astrale è successa [sIGPIC][/sIGPIC]
Lorenzo.D Posted August 21, 2016 Author Posted August 21, 2016 Visto ora le risposte domani da pc scarico la mix modificata...che cose assurde...grazie mille. Inviato dal mio ASUS_Z00LD utilizzando Tapatalk
Lorenzo.D Posted August 22, 2016 Author Posted August 22, 2016 Che cambia tra,fac e fac engage group? Ho notato che hai usato un altra unita per fare da jtac...tutti i mezzi possono farlo? Inviato dal mio ASUS_Z00LD utilizzando Tapatalk
chromium Posted August 23, 2016 Posted August 23, 2016 AFAIK: fac engage group specifica un bersaglio, e sarà passato solo quello anche se altri "migliori" sono a disposizione. fac non specifica, e lascia al JTAC scegliere la priorità. trovi una marea di riferimenti e guide in merito nella sezione inglese, ma devi cercare. a suo tempo solo le unità munite di EPLRS potevano fare efficacemente JTAC, forse oggi è cambiato qualcosa.. boh. Author of DSMC, mod to enable scenario persistency and save updated miz file Stable version & site: https://dsmcfordcs.wordpress.com/ Openbeta: https://github.com/Chromium18/DSMC The thing is, helicopters are different from planes. An airplane by it's nature wants to fly, and if not interfered with too strongly by unusual events or by a deliberately incompetent pilot, it will fly. A helicopter does not want to fly. It is maintained in the air by a variety of forces in opposition to each other, and if there is any disturbance in this delicate balance the helicopter stops flying; immediately and disastrously.
Recommended Posts