Redglyph Posted April 22, 2017 Posted April 22, 2017 (edited) In DCS version 1.5.6.4546.280. If I switch to cargo view (LALT + LSHIFT + Q), I have the expected down view, to help with cargo operations. However, if I hit the shortcut again to get back to pilot view, the camera has moved left and is almost in the centre of the helicopter, not in the pilot's seat anymore. After that, if I switch back and forth between the pilot and copilot view, or any view, it cannot be set back to its original position. The copilot view is correct though. The only way I found to get back the pilot view is to start a new mission. If I try the same from the copilot's seat, the problem is the same in the other direction, its position has moved right. UPDATE: I also found that tuning the view with RCTRL+RSHIFT+NUM4 / NUM6 was not working anymore after a camera has been switched to the cargo view. So for now, this cargo view really shouldn't be used. Edited April 22, 2017 by Redglyph System specs: Win7 x64 | CPU: i7-4770K | RAM: 16 GB | GPU: GTX 980 Ti 6 GB | Thrustmaster HOTAS | MFG rudder pedals | SATA3 SSD | TrackIR
Redglyph Posted September 9, 2017 Author Posted September 9, 2017 Hello, BSM support? Any reply? This bug is still in 1.5.7.9411.361. System specs: Win7 x64 | CPU: i7-4770K | RAM: 16 GB | GPU: GTX 980 Ti 6 GB | Thrustmaster HOTAS | MFG rudder pedals | SATA3 SSD | TrackIR
Redglyph Posted October 4, 2017 Author Posted October 4, 2017 bump. Is Belsimtek reading those error reports? Also, there seems to be a problem with the update of the Huey weight. When I hook a cargo the first time then unhook it, as soon as I hooked a cargo for the 2nd time the helicopter gets a lot of buoyancy and climbs quite fast, as if its mass was suddenly reduced dramatically. System specs: Win7 x64 | CPU: i7-4770K | RAM: 16 GB | GPU: GTX 980 Ti 6 GB | Thrustmaster HOTAS | MFG rudder pedals | SATA3 SSD | TrackIR
Holton181 Posted December 4, 2017 Posted December 4, 2017 Still present, 1.5.8.... Helicopters and Viggen DCS 1.5.7 and OpenBeta Win7 Pro 64bit i7-3820 3.60GHz P9X79 Pro 32GB GTX 670 2GB VG278H + a Dell PFT Lynx TrackIR 5
Holton181 Posted December 7, 2017 Posted December 7, 2017 Noted. Will try to reproduce.Excellent, thank you! Helicopters and Viggen DCS 1.5.7 and OpenBeta Win7 Pro 64bit i7-3820 3.60GHz P9X79 Pro 32GB GTX 670 2GB VG278H + a Dell PFT Lynx TrackIR 5
belsimtek Posted December 9, 2017 Posted December 9, 2017 Fixed. Will be sent to ED, for inclusion into patch schedule. 2
Holton181 Posted December 9, 2017 Posted December 9, 2017 Fixed. Will be sent to ED, for inclusion into patch schedule.Thanks! (love your recent increase in communication by the way) Helicopters and Viggen DCS 1.5.7 and OpenBeta Win7 Pro 64bit i7-3820 3.60GHz P9X79 Pro 32GB GTX 670 2GB VG278H + a Dell PFT Lynx TrackIR 5
Redglyph Posted December 9, 2017 Author Posted December 9, 2017 Thanks! (love your recent increase in communication by the way) Same here! :) System specs: Win7 x64 | CPU: i7-4770K | RAM: 16 GB | GPU: GTX 980 Ti 6 GB | Thrustmaster HOTAS | MFG rudder pedals | SATA3 SSD | TrackIR
Holton181 Posted January 19, 2018 Posted January 19, 2018 Fixed. Will be sent to ED, for inclusion into patch schedule. So, finally updated to 1.5.8.12823 (delayed due to other problems in campaigns). Went to try if this had been fixed. Well, it sort of has. There are no issues after returning back to normal view. Big thank you for that. But, sorry to say, Cargo View are more or less useless now anyhow. Now the pilot head does not lean out the window during Cargo View as it did before, so you can not see the cargo underneath. This goes for 2.2.0.12843 as well. Hope you can correct that when time permits. Helicopters and Viggen DCS 1.5.7 and OpenBeta Win7 Pro 64bit i7-3820 3.60GHz P9X79 Pro 32GB GTX 670 2GB VG278H + a Dell PFT Lynx TrackIR 5
Recommended Posts