colinwilloughby Posted July 10, 2017 Posted July 10, 2017 My first post regarding this problem is as follows. Since first installing DCS World 2 Open Alpha 2.1.1 Nevada and Ka-50 Black shark 2, I have had the problem with uncaging SHKVAL which ever key or button I assign (including default "O") I get the same problem which is the cockpit screen flashing between cockpit and kneepad. this can occur in any training mode. Cold start, Takeoff, Free Flight and Shooting range. ONLY WHEN I TRY TO UNCAGE. I am running windows 10 64Home addition after upgrading from 7 due to this issue (just in case). I have Saitek X52 controllers, Logitech key board changed from Dell (just in case) Twice downloaded and reinstalled the above with all updates. I have tried clearing the keyboard category and using buttons on my X52 but to no avail. This has been going on now for three weeks trying to solve this issue, so now I am seeking help from the community. I appreciate the response from "Isegrim" and "Nero.ger" but the problem could not be resolved due to what seems to be a one off. However, I have resolved the problem and find it a responsibility to pass the info on to the community. Having reinstalled many times, played about with input config, check graphic cards but could not nail it down. As I was running two AMD graphics card in crossfire I started out with medium settings. After all of the above, I then tried low setting which resolved the problem (to my relief) Switching between low, medium and high settings I noted the difference in the tick box settings and then turned off these settings one at a time. It turned out that the problem was with "Deffered shading" which in turn, turns on/off "cockpit global illumination" With these turned off my problem was eliminated. I can now continue to learn and fly this remarkable sim. Regards to all.
Recommended Posts