RvETito Posted January 26, 2007 Posted January 26, 2007 I was remapping my russian flighters profile and I wanted to assign RightWin+I(radar BVR modes) to the HAT 2 down position but the software don't recognize the keystroke as combined but as sequence of separate buttons, no matter how I press these keys. Anyone? "See, to me that's a stupid instrument. It tells what your angle of attack is. If you don't know you shouldn't be flying." - Chuck Yeager, from the back seat of F-15D at age 89. =RvE=
Black_Hawk Posted January 26, 2007 Posted January 26, 2007 Have you tried making a macro? Make it with a short interval (0.01, 0.05...) 159th GAR LockOnFiles CAW Team
RvETito Posted January 26, 2007 Author Posted January 26, 2007 Tried both with short and longer delay interval- it executes only the I key command i.e. turning the radar on/off. It seems that the profile editor doesn't recognize the RightWindows key. "See, to me that's a stupid instrument. It tells what your angle of attack is. If you don't know you shouldn't be flying." - Chuck Yeager, from the back seat of F-15D at age 89. =RvE=
Black_Hawk Posted January 26, 2007 Posted January 26, 2007 Strange. How about reassigning the keystroke in LO so you will be able to program the macro from SST? I reassigned quite a lot of commands in LO so that the profile editor could recognize some of my macros and make them work. 1 159th GAR LockOnFiles CAW Team
CharlieMike24 Posted January 26, 2007 Posted January 26, 2007 My keyboard doesn't have a RWin button. I got around this by using Lock On keyboard options to change "RWin+I" into "Ctrl+I" (or some other key combination). Make sure the x52 hat is being programmed as "buttons" and then program it to press "Ctrl+I". Hope this helps.:) 1 [sIGPIC][/sIGPIC]
RvETito Posted January 26, 2007 Author Posted January 26, 2007 Thanks guys, reassigning the command in LO solved the problem. I used single key- Backspace- rather a combination of keys. Rep inbound for both of you :thumbup: "See, to me that's a stupid instrument. It tells what your angle of attack is. If you don't know you shouldn't be flying." - Chuck Yeager, from the back seat of F-15D at age 89. =RvE=
Guest mike240se2 Posted January 28, 2007 Posted January 28, 2007 Did you have the problem with your x52 where everytime you go to assign a joystick button it automatically assigns button 32 and 34 which are the scroll wheel? Its driving me nuts, i went into the driver config and its not permenantly stuck or anything, its weird. i tried rebooting to no avail
Black_Hawk Posted January 28, 2007 Posted January 28, 2007 Don't program the keystrokes in LO, use SST instead, it is MUCH better, and each button can have up to 6 commands. 159th GAR LockOnFiles CAW Team
Recommended Posts