delevero Posted June 8, 2018 Posted June 8, 2018 Hello Yesterday i found a bug in the lower MDF ( screen ). The problem is that when I enter a custom waypoint then I cannot change waypoint with the waypoint button on the DATA page and cycle though waypoint 0-1-2-3 On the screen it look like waypiont 0 all the time, but when you press the waypoint button then you can see the coordinates change. Both the waypoint number, and the Waypoint text on the data screen do not change on the lower MDF behind the joystick. But if you program a custom waypoint and enter coordinates via one of the left or right MDF then you can change waypoints. If you only use the top left and right MDF for programming waypoints then everything work perfect.. But if you use the lower MDF then the above will happen. How to reproduce. 1). Use the Lower MDF behind the joystick 2). Press MODE 2 times until the HSI turn black ( then the text is more easy to see ). 3). Press DATA 4). In lower left corner press "sequens" 5). Press INS and press 0 enter.. press INS and press 1 enter Press INS and press 2 enter Press INS and press 3 enter Now you have waypoint 0-1-2-3 6). Press UFC button and click on the button named POSN An easy example with unrealistic coordinates that are fast to test. Press N22222 and enter. Press E11111 and enter Now your MDF is updated with the above coordinates. But when you try to press the waypoint up and down button on the lower MDF then it will not change the waypoint number. ( but the coordinate change) And it will also not update the Waypoint number on the top of the lower MDF. 6). If you Now try to use your your Left or Right MDF and Press MODE and HSI and DATA then you are able to change the waypoint via the waypoint buttons, and you also see the text update example waypoint 1. Notise that the lower MDF screen do not change its waypoint or waypoint text. I hope this had the required information to illustrate and find the problem.
Recommended Posts