ElCoyote_ Posted December 26, 2018 Posted December 26, 2018 Hi All, I used to fly LoMAC back in the days (2010?) and I've installed DCS World 2.5 recently. There is one graphical glitch that's driving me a little crazy and I cannot find a setting to mitigate the issue in either Windows 10 or DCS World. Any advice would be much appreciated. Setup: Dell Precision T5610 workstation with: - Windows 10 Pro (October 2018 update) - 2*8C/16T Xeon V2 chips @ 3.4Ghz - 256GB @1866Mhz RAM. - Samsung SSD - Asus GeForce 1050 ti. - Dell UW3417w 4k monitor (native resolution: 3340*1440), a 21:9 monitor Because my GPU isn't at the top of the line and because I like a good frame rate in flight sims, I've decided to run DCS World in: - Full-screen, 1720x720 (1/4 of 3440/1440) - Settings set to 'High' This gives me a decent flying experience without having the GPU choke on running things @ 3440p (1720x720 is good enough for me). When I start the game and get to the main screen, my mouse cursor movement is amplified by a factor of two from the topleft corner of the monitor: If I want to highlight a button at the bottom right of the screen, I must place the cursor in the center of the screen. In order to reach the 'Nevada' button, I must place the cursor toward the middle of the screen near the left border (the middle of a straight line from 0,0 to the 'Nevada' Button). I've found that if I leave full-screen (Alt-Enter) and go back to DCS (Alt-Enter again) -then- the mouse movement becomes 1:1 as it normally should. I've tried modifying the high DPI settings for DCS World in Windows 10 but it didn't make any difference. Any ideas? Aside from that glitch, I'm pretty happy with DCS and have already purchased a few planes and maps.
Wookie45 Posted March 20, 2019 Posted March 20, 2019 Hi All, I used to fly LoMAC back in the days (2010?) and I've installed DCS World 2.5 recently. There is one graphical glitch that's driving me a little crazy and I cannot find a setting to mitigate the issue in either Windows 10 or DCS World. Any advice would be much appreciated. Setup: Dell Precision T5610 workstation with: - Windows 10 Pro (October 2018 update) - 2*8C/16T Xeon V2 chips @ 3.4Ghz - 256GB @1866Mhz RAM. - Samsung SSD - Asus GeForce 1050 ti. - Dell UW3417w 4k monitor (native resolution: 3340*1440), a 21:9 monitor Because my GPU isn't at the top of the line and because I like a good frame rate in flight sims, I've decided to run DCS World in: - Full-screen, 1720x720 (1/4 of 3440/1440) - Settings set to 'High' This gives me a decent flying experience without having the GPU choke on running things @ 3440p (1720x720 is good enough for me). When I start the game and get to the main screen, my mouse cursor movement is amplified by a factor of two from the topleft corner of the monitor: If I want to highlight a button at the bottom right of the screen, I must place the cursor in the center of the screen. In order to reach the 'Nevada' button, I must place the cursor toward the middle of the screen near the left border (the middle of a straight line from 0,0 to the 'Nevada' Button). I've found that if I leave full-screen (Alt-Enter) and go back to DCS (Alt-Enter again) -then- the mouse movement becomes 1:1 as it normally should. I've tried modifying the high DPI settings for DCS World in Windows 10 but it didn't make any difference. Any ideas? Aside from that glitch, I'm pretty happy with DCS and have already purchased a few planes and maps. Hello, ElCoyote I'm having similar problems when the full screen is set and actually problems are bigger with the F14 VC cause all button an switches imputs are also displaced in an exagerated way making almost impossible to start up from cold and dark even with the Jester assistance, so I'm joinning with the request of a HELP about it.!!!!!!
Recommended Posts