Huey_casper Posted April 11, 2019 Posted April 11, 2019 Hi Everyone, I had a trouble runing dcs in LAN. We were unable to reach the local server with the 4 PC's (see image attached) If I created the local server in .100 only .101 could see it, and vice versa. The same if I made it in .102 or .103. only those 2 could be connected. The PC's were in the same workgroup, the firewall was disconnected and the sharing passwords from windows were off. What could it be? PD: The SRS server in .100 could be reached with all PC's
FragBum Posted April 11, 2019 Posted April 11, 2019 Your network should work fine fine. Have you set the net mask to 255.255.255.0 Have you. Enable network sharing Enable network discovery Set network profile to private Disabled DHCP in your modem/router or at least set a DHCP range of say 192.168.0.200 to 162.168.0.220? Use a CMD (command line) and use the ping utility to check connectivity. Control is an illusion which usually shatters at the least expected moment. Gazelle Mini-gun version is endorphins with rotors. See above. Currently rolling with a Asus Z390 Prime, 9600K, 32GB RAM, SSD, 2080Ti and Windows 10Pro, Rift CV1. bu0836x and Scratch Built Pedals, Collective and Cyclic.
Huey_casper Posted April 12, 2019 Author Posted April 12, 2019 Hi FragBum, I enabled network sharing, I had enabled the network discovery, and the network was on private profile. From CMD I made ping with all the others PC's. I didn´t check the DHCP, but still I had the problem.
Recommended Posts