Jump to content

Standby Compass Shows True Heading


ExA4K

Recommended Posts

The standby compass (or wet compass) should show magnetic heading, but it appears to be showing true heading in the F-16.

After alignment, the HSI will show magnetic heading - which should match the standby compass heading (IRL within a degree or 2). The DED INS page shows the True heading, and this matches what the standby compass is showing.

 

 

In the attached image taken while stationary, the mag heading is 300 and the true heading 305 deg and the standby shows a heading of 305.

Screen_191220_140152.thumb.png.1fb794311e467695ffab33ba28035258.png

Link to comment
Share on other sites

The standby compass (or wet compass) should show magnetic heading, but it appears to be showing true heading in the F-16.

After alignment, the HSI will show magnetic heading - which should match the standby compass heading (IRL within a degree or 2). The DED INS page shows the True heading, and this matches what the standby compass is showing.

 

 

In the attached image taken while stationary, the mag heading is 300 and the true heading 305 deg and the standby shows a heading of 305.

 

How sure are you that the EHSI should show magnetic? I think it is slaved to the INS/GPS.

Link to comment
Share on other sites

The HSI shows Mag heading, (calculated from INS true heading and adjusted from a MagVar look up table).

 

F-16 manual refers: Compass Card. Arrayed around the periphery of the HSI, this is a compass that rotates such that the top of the compass indicates the aircraft’s magnetic heading.

Link to comment
Share on other sites

The HSI shows Mag heading, (calculated from INS true heading and adjusted from a MagVar look up table).

 

F-16 manual refers: Compass Card. Arrayed around the periphery of the HSI, this is a compass that rotates such that the top of the compass indicates the aircraft’s magnetic heading.

 

You are absolutely correct..

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...