Mr. Big.Biggs Posted January 13, 2020 Posted January 13, 2020 So I have the yellow tdc cursor mapped to a push button hat on my virpil cm50 stick. In joystick test it reads just fine. When radar screen is clear (no traffic) i can wiz that baby all over the place. As soon as a target appears, ot gets balky and difficult to move over the target. Acts like the switch is failing but never happens on the joystick test or with clear scope. Any ideas?? Thanks I9 (5Ghz turbo)2080ti 64Gb 3200 ram. 3 drives. A sata 2tb storage and 2 M.2 drives. 1 is 1tb, 1 is 500gb. Valve Index, Virpil t50 cm2 stick, t50 base and v3 throttle w mini stick. MFG crosswind pedals.
MudMover Posted January 13, 2020 Posted January 13, 2020 You might try making sure realistic TDC slew is unchecked. It's in Options, special tab and then click on F/A 18 on the left.
takamba Posted January 13, 2020 Posted January 13, 2020 But this option only affects the AGM-65E seeker head, afaik. I don't think this will bring an improvement for OP's issue. DCS Rafale - please :thumbup:
Mr. Big.Biggs Posted January 13, 2020 Author Posted January 13, 2020 Will give it a try. Will also try a different hat and report back. Didn’t know if maybe it was a known issue. Thanks I9 (5Ghz turbo)2080ti 64Gb 3200 ram. 3 drives. A sata 2tb storage and 2 M.2 drives. 1 is 1tb, 1 is 500gb. Valve Index, Virpil t50 cm2 stick, t50 base and v3 throttle w mini stick. MFG crosswind pedals.
Recommended Posts