MBot Posted April 30, 2020 Posted April 30, 2020 Waypoint speed defined in the mission editor is incorrectly applied to the TID in the aircraft. In the mission editor, the set waypoint speed means speed TO the waypoint. Speed is then set to the same waypoint in the aircraft. But because the logic in the Viggen means speed FROM the waypoint on, this sets to wrong speeds for the respective route legs. Example flight plan defined in mission editor: WP0: Take Off WP1: speed locked M0.7 WP2: speed M0.9, time locked 12:30:00 This is how this is automatically transferred to the aircraft: LS B1: speed M0.7 M2: TOT 123000 This is how it should be transferred to the aircraft: LS B1: speed M0.9 M2: TOT 123000 Remember, in the Viggen B1 defines speed from B1 to B2.
Recommended Posts