drPhibes Posted January 13, 2022 Posted January 13, 2022 Since I also use my gaming headset for other things than gaming, I've been looking for a good quick detachable mount for my Delanclip headtracker. Welcro, which I used up until now, is too floppy (and every small tug of the cable results in annoying noise), so I had a look in my junk drawer, and found a Gopro mount that seemed suitable for modification. The upper part of this mount turned out to be detachable, and the hole pattern for two of the screws matched the holes in the Delanclip almost exactly: The curved top surface of the mount wasn't suitable for mounting the Delanclip directly, so I made an adapter: The finisted 3d printed adapter on the mount base: The first mock-up. Except for the screws being too short (I changed them later), everything fit perfectly. And the finished assembly. I used M3x20 DIN 963 countersunk screws. An equivalent 4-40 UNC screw/nut combo probably works just as well. If anyone else is interested in this type of mount, the CAD (in step and stl formats) can be downloaded here: https://github.com/adler357/cad
Recommended Posts