Indianajon Posted March 8, 2022 Posted March 8, 2022 Hi all, I am aware that for a long time the horizontal needle is out of sinch with the glideslope which I assume is because it is following the F/A18 glideslope and that this has been highlighted preciously. Ie. The issue that if you follow the needles so you are on and on they will call out that you are up and on. I am also aware that at some point in recent history you have tried to fix this but a recent flight has shown me that now while the HUD shows the correct glideslope the HSD continues to show as previous. I have also noted that if you select auto throttle and ACLS it appears to pogo between the two different glideslopes. Fun but terrifying when you get close to the boat in VR . Its not a real issue as the HUD symbology makes recovery in manual better than the previous as you aren't trying to guesstimate where the needle should be, but I just wanted to highlight that the issue is still present as i have not seen it mentioned and it is clear a fix has been attempted. Ps. I should add I have only tried this in the A model and am aware it might not be present in the B, as is the case for the deckcrew handsignals which still treat the A model like a hornet and ask you to raise the launch bar after hooking up.
Recommended Posts