Issue using a panel1 with aux connection to the throttle

[Galinette]

Hi,

I have a CM3 throttle and a Panel1 which work fine in standalone.

I want to connect the panel to the throttle in order to have one less device to manage.

So I updated the VPC configurator to latest (20220304). It asked me to update my device firmwares, which I did.

Then I disconnected everything, connected the Panel#1 OUT to the Throttle AUX, then the Throttle USB to the computer. I let the Panel USB unplugged.

I went to VPC configurator, and created a new profile for the throttle, with the Panel1 selected on the right. Then I updated the throttle.

Now if i go to axis, it has 8 of them as it should. But the throttle axis 4,5,6 do not work (the raw values doesn't update at all) and the axis 7,8 (panel potentiometers) are frozen at 0 and do have a non-zero "Link Error" column value and are in red. Calibration doesn't help (as expected since the raw value doesn't work)

The throttle is plugged on a powered USB hub so there should be no USB power issue.

What could be the issue?

Thanks!

[vr2viv]

Did you change your Panel 1 to Slave Mode before switch cable to OUT & AUX?  Check the tutorial below may help.