SkipCarey Posted March 20, 2022 Posted March 20, 2022 looked for the acronyms in the quick start , can anyone HELP!!!!!!(and Im sure there are some experts here)this things got a buncha damn triggers, I got a mode switch to go from left to right but that doesnt seem to be enough.................
Arendellecita Posted March 20, 2022 Posted March 20, 2022 (edited) BUCS - Back-Up Control System (You might not need this) Quote Normally, the pilot and CPG flight controls are mechanically linked. The mechanical linkages are protected by shear pins and mis-track sensors to prevent a control jam or severance from affecting both sets of flight controls. If the flight controls are decoupled by the shear pin, or a mis-track is otherwise sensed, the Back-Up Control System is automatically activated. The BUCS is a single-channel, four-axis, non-redundant electric fly-by-wire (FBW) system. The FBW system is designed to replicate the feel of the hydromechanical controls but does not replicate SCAS functionality. BUCS can only be active for the pilot or the CPG station. Either the pilot or the CPG can transfer BUCS control to their station if necessary, depending on the nature and location of the jam or severance within the flight controls. CHOP - Reduce engine power to IDLE (You might not need this either) Quote Pressing this button activates the chop circuit, which reduces engine power to idle. Pressing it again resets the chop circuit and restores normal engine power. HOCAS - Hands On Collective And Stick (This category refers to the buttons on your cyclic stick and collective, which are not clickable) Edited March 20, 2022 by Arendellecita
Recommended Posts