Mission 9 Part 2

[Terence Hill]

hi , why my GBU at 02:31 will not damage the target? I try this mission 3 times ,and the gpu was set wit pp and instant modus.

everytime i only damage the tagets at 50-80% but never destroy it.

i upload the tacview file

Tacview-20230215-205630-DCS-ROPL2 M9 EZ PART 2 RUMBLE WITH A GRUMBLE.zip.acmi

[Badger633]

35 minutes ago, Terence Hill said:

hi , why my GBU at 02:31 will not damage the target? I try this mission 3 times ,and the gpu was set wit pp and instant modus.

everytime i only damage the tagets at 50-80% but never destroy it.

i upload the tacview file

Tacview-20230215-205630-DCS-ROPL2 M9 EZ PART 2 RUMBLE WITH A GRUMBLE.zip.acmi 1.54 MB · 0 downloads

Hi, just checked out your track. You successfully hit the clam shell, but It would appear your GBU aimed at the  MK1 Radar missed. See the attached image from your Track. Think you may have made an error entering the Northing for the MK1 Radar target. You will note the coordinates are:

PRECISE COORDS 
TARGET 1, NORTH 27 40 02 . 47, EAST  54 46 25 . 31, HT  2,012 FEET,TARGET 2, NORTH  27 40 02 . 55, EAST  54 46 28 . 14 HT 2,012 FEET. 

Note the Northing for both targets are very close, within a couple of feet.  You will see your Tacview shows the GBU heading for the Clam shell spot on whilst your GBU on the Mk1 Radar is impacting much further south and misses the target altogether, when they should both be on the same north south position as the Northing coords are virtually the same for both. 

Retry but make sure the coord entry is exact. You should check your coordinate entries tally with those displayed on the cockpit display after completion of the coordinate entry exactly for both targets.

If you still have a problem send me a track of your coordinate entry. 

Thanks for the heads up as it is useful as the SA10 should keep sending missiles and not allow you to come in and strafe the area as you did, which will disjoint the mission script. Will get that fixed.

Hope this helps

Badger633

[Terence Hill]

vor 7 Minuten schrieb Badger633:

 

If you still have a problem send me a track of your coordinate entry. 

 

 

how i can show u the track?

first thank you for your help .So i maybe can hit the coordinates wrong 1 time , but this happends 3 time , all the track files look like this and im sure i type the correct coordinates .

i upload a nother track where u can see my first run in this mission . there im 100% sure that i put the correct coordinates cause i double check them on the GBU pp page . I try this mission 3 times ,all 3 times my GBU never destroy the targets complete , maybe i missing something?

 

 

Tacview-20230215-191919-DCS-ROPL2 M9 EZ PART 2 RUMBLE WITH A GRUMBLE.zip.acmi

Edited February 16, 2023 by Terence Hill

[Badger633]

50 minutes ago, Terence Hill said:

how i can show u the track?

first thank you for your help .So i maybe can hit the coordinates wrong 1 time , but this happends 3 time , all the track files look like this and im sure i type the correct coordinates .

i upload a nother track where u can see my first run in this mission . there im 100% sure that i put the correct coordinates cause i double check them on the GBU pp page . I try this mission 3 times ,all 3 times my GBU never destroy the targets complete , maybe i missing something?

 

 

Tacview-20230215-191919-DCS-ROPL2 M9 EZ PART 2 RUMBLE WITH A GRUMBLE.zip.acmi 1.46 MB · 0 downloads

 

Hi, thanks, the second track misses the first target by a small amount as you can see. Attached. This is why it was not destroyed. 

To record a track, just run through the mission and when you close it you will have an opportunity to save track on the next screen at the bottom. Note where it is saved usually in your saved games folder for DCS under tracks and then send the trk file to me here.  badger633campaigns@gmail.com

In the meantime I will run it this end to check all is well. Nobody else has reported this to date. Lastly do you run any mods as this can impact missions in strange ways.

Oh, and do not descend when dropping the GBUs you were almost hit by your own bombs.    

[Terence Hill]

@Badger633ah mods ....yes i do maybe and i guess it must be it . i got SAM mods (SAMSiteasset and Sampack) and more , ill delete them and will try later ,thanks .

[Badger633]

1 hour ago, Terence Hill said:

@Badger633ah mods ....yes i do maybe and i guess it must be it . i got SAM mods (SAMSiteasset and Sampack) and more , ill delete them and will try later ,thanks .

Just so you know just flew mission and took out both targets, the coords are correct. Also check you have entered the height for each  target correctly in feet.  Other than that send me the track.

Cheers

[Terence Hill]

i will test it later without mods ,but im pretty sure i type it correct ,specially after my first run dont hit . i checked all twice . high was 2012 FEET N and E also correct .It must be the mods

Edited February 16, 2023 by Terence Hill

[Badger633]

1 hour ago, Terence Hill said:

i will test it later without mods ,but im pretty sure i type it correct ,specially after my first run dont hit . i checked all twice . high was 2012 FEET N and E also correct .It must be the mods

 

If it doesn't work out remember to save track files and send to me.  https://www.bing.com/videos/search?q=dcs+how+to+save+a+track+file&&view=detail&mid=F5061C7D031DBC449A8BF5061C7D031DBC449A8B&&FORM=VRDGAR&ru=%2Fvideos%2Fsearch%3Fq%3Ddcs%20how%20to%20save%20a%20track%20file%26%26FORM%3DVDVVXX

[Badger633]

2 hours ago, Terence Hill said:

i will test it later without mods ,but im pretty sure i type it correct ,specially after my first run dont hit . i checked all twice . high was 2012 FEET N and E also correct .It must be the mods

 

Have now updated mission to give a little more tolerance as to target location, and the SAM site will no longer stop firing missiles  when first  Flip Lid is destroyed, so near impossible to strafe site if both are not hit first time and thus disjoint script. Will be out in next update.  

[Terence Hill]

it was the mods , i run it 3 times without mods and all 3 times i hit both targets .

[Badger633]

2 minutes ago, Terence Hill said:

it was the mods , i run it 3 times without mods and all 3 times i hit both targets .

Hi , yes all the campaign creators have noticed that mods are having strange effects. All of the DLC campaigns are tested without mods, as there are too many to check. The Campaigns should be played without mods.  

Glad you got it sorted, enjoy the campaign. 

[Terence Hill]

thank you for your help and you campaign is amazing . i love to play it

[Terence Hill]

@Badger633but one thing i got to tell you as a persian ; Azad dont mean lion (Sheer/Shear means Lions) - in the first campaign it was translated to lion , Azad means freedom in Farsi

Edited February 16, 2023 by Terence Hill

[Terence Hill]

btw.: this is one of my most favorite mission ,and i flew a lot of campaigns in different planes

[Badger633]

2 hours ago, Terence Hill said:

@Badger633but one thing i got to tell you as a persian ; Azad dont mean lion (Sheer/Shear means Lions) - in the first campaign it was translated to lion , Azad means freedom in Farsi

 

Hi, got it for meaning of name from Wikipedia 

lion

 

Asad (Arabic: أسد), sometimes written as Assad, is an Arabic male given name literally meaning "lion". It is used in nicknames such as Asad Allāh, one of the by-names for Ali ibn Abi Talib. Asad. Pronunciation.

From imuslim.name 

The name Asad (Arabic writing : اساد) is a Muslim boys Names. The meaning of name Asad is " Happy, fortunate, lucky,Virtuous, Lion "

So it is the meaning of the name rather than a direct translation.

Edited February 16, 2023 by Badger633