Pnguin9999 Posted March 22, 2023 Posted March 22, 2023 I finally got MT working relatively smoothly at around 30 fps in the UH-1 Marianas which before would crash Virtual Desktop and Steam VR. 40-50 fps in the NTTR in an A-10A. System Specs, MOBO=ASRock X570 Pro4 CPU=AMD Ryzen 7 5700X, 8 core GPU=Zotac RTX 3060 Ti OC edition, no overclocking, will try under volting and report back. RAM=TEAMGROUP T-Force Vulcan Z DDR4 32GB Kit (2x16GB) 3200MHz (PC4-25600) CL16 Desktop Memory Module DCS Openbeta on a dedicated 2TB NVMe M.2 drive Headset=Pico 4, CAT 8 Ethernet direct from a dedicated 5G router to an Ethernet to USB C adapter, steady 1200 MBPs. For a 3060 card use Nvidia driver 522.25, it has issues with newer drivers. Follow the instructions in these videos. Follow the instructions in this video to install Process Lasso and tune it to control your CPU processes. Set DCS, Steam VR, and Virtual Desktop Priority to high. Set DCS to only use physical cores. https://www.youtube.com/watch?v=M2TEEq5tIGM&ab_channel=Panjno My DCS settings except shadows are on flat, picture attached, VR pixel at 1.0. Steam VR resolution 100%. Nvidia control panel pictures attached. DCS Open Beta 2.8.3.38090. Verify Steam VR files, two were missing from mine. Use a shortcut to the DCS.exe in bin_MT with --force_enable_VR --force_OpenXR at the end of the target. I hope this helps. All credit to Panjno for his how to videos and whoever came up with the force VR shortcut. null "There is no problem that can't be solved with the proper application of the correct amount of explosives." Every Demo NCO. Ryzen 7-5700X, RTX 3060Ti, 64GB RAM, 2TB M.2 SSD, Asus 5G/WIFI 6 router, Pico 4 wired to router (CAT 8/USB C).
Recommended Posts