Snappy Posted May 11, 2023 Posted May 11, 2023 (edited) I'm not sure to which level Heatblur aims to model non-normal system interdependencies and failure symptoms. But after sustaining battle damage I had a failure of the hydraulic system 2, to be specific, what the manual calls Case 2a. Case 2a: Failure: Main pump failure in System 2. Indication: HYDR TR 2 is lit, Master Caution on, the hydraulic pressure is lost and the reserve pump has engaged and is supplying pressure. Consequences: The secondary DC circuits are disconnected, which leads to the following: • Radar ceases to function. • HUD and Radar display are turned off. • Armament and Countermeasures cannot be used. • External lights, anti-collision lights and landing lights cease. • RHM (Radar altimeter) ceases to function, indicator RHM-FEL is lit if altitude < 1,200 m and pitch and roll angle is greater than < 40°. After gear extension, all main power buses will be supplied by the main battery, which will last for about 15 minutes. All power from the inverters will now be dedicated to running the reserve hydraulic pump. It seemed to be actually modelled , the HYDR TR2 light was on, as was the RHM-FEL at low alt ,the Radar altimeter and the Radar itself stopped working. Weapons could no longer be fired. But the HUD kept functioning normally , contrary to what the manual says. If this is beyond the scope of what heatblur wants to model, simply disregard this . Otherwise maybe the HUD failure can be included in this scenario. Regards Snappy Edited May 11, 2023 by Snappy 1
Silhou Posted May 11, 2023 Posted May 11, 2023 Hey, @Snappy! Tracked internally as AJS37-361 for the team to look if bug or not. Thank you. 1
Recommended Posts