pete_auau Posted June 28, 2023 Posted June 28, 2023 (edited) Ok i set a mission for aar training set radio for tanker 25100 as i had done with f16 and f18 missions etc. Go to mission set tacan located tanker than i set radio to 251 on the left hand radio, but no matter what i have tried i cannot get in contact with the tanker. Thought i set up the mission wrong so i swapped the f15e for the f-18 and of course had no issues contacting the tanker. So iam missing a step some where. I been following this guy on how to set up the radio for aar(doing a air start ) https://www.youtube.com/watch?v=CcluPB6MS2E&t=399s Edited June 28, 2023 by pete_auau
Despayre Posted June 28, 2023 Posted June 28, 2023 Punch in the freq on the scratchpad, press PB5, and that sets the radio to that freq, but then, you also gotta hit the "GREC C/M" button to switch to manual from channels (presets). 1 I'm not updating this anymore. It's safe to assume I have all the stuff, and the stuff for the stuff too.
pete_auau Posted June 28, 2023 Author Posted June 28, 2023 26 minutes ago, Despayre said: Punch in the freq on the scratchpad, press PB5, and that sets the radio to that freq, but then, you also gotta hit the "GREC C/M" button to switch to manual from channels (presets). Thx for your quick reply yes i was dong your step all the time and every thing else i could think of, but as i said in my topic it was a simple error i made in the m.e i had set the wrong tanker i had put in the kc-135mprs tanker lol now everything is now working. Was going stir crazy there for a while 1
Recommended Posts