Jump to content

Monster FFB Rhino DIY kit supplyservice (Supplementary to Kaltokri/Winger Kits)


Recommended Posts

Posted

Hi @everyone.

I just want to say that I have ordered the Monster Rhino kit from David and the service and quality of 3D prints and everything has been amazing! David and Billy helped me to put it together and offered assembly advice as I went along. I was able to put it all together in a day, including testing and tuning. 

Big thank you to @Winger for the fast service and amazing work!

IMG_2946.jpeg

  • Like 4
Posted

Hello Danielle, i am glad you Like IT and Had a pleasant experience. I am also glad you enjoy flying with a Rhino. ITS simply amazing.

  • Like 1
Posted (edited)

Hi

While I were waiting for a regular rhino, I had the chance to contact @Winger, and that was the time when my monster rhino were born. I ordered the kit from David and the engine kit from @walmis( 86bl 04, the bigger engines). The quality was excellent, the time from my order to when the kit were to me was only 3 weeks. The assembly itself was pleasure to me ,actually it took an evening to complete. The difference between flying spring loaded joystick and Rhino ffb is like night and day, now I can feel the flight with my hand, I could hold the pressure just before the stall.....amazing. Thank you David again, and If someone is concerned about whether to go to Rhyno, dont hesitate just contact David and change direct to the monster.

P.S. I use only 7,5sm extension, now wit the M.Rhyno the distance from pivot point to the grip is the same like previously used 20sm with my VKB gunfighter.

475329641_9141069615999846_3677325306836920545_n.jpg

Edited by Niksan_73
Posted (edited)
11 hours ago, Niksan_73 said:

Hi

While I were waiting for a regular rhino, I had the chance to contact @Winger, and that was the time when my monster rhino were born. I ordered the kit from David and the engine kit from @walmis( 86bl 04, the bigger engines). The quality was excellent, the time from my order to when the kit were to me was only 3 weeks. The assembly itself was pleasure to me ,actually it took an evening to complete. The difference between flying spring loaded joystick and Rhino ffb is like night and day, now I can feel the flight with my hand, I could hold the pressure just before the stall.....amazing. Thank you David again, and If someone is concerned about whether to go to Rhyno, dont hesitate just contact David and change direct to the monster.

P.S. I use only 7,5sm extension, now wit the M.Rhyno the distance from pivot point to the grip is the same like previously used 20sm with my VKB gunfighter.

475329641_9141069615999846_3677325306836920545_n.jpg

Hey Mate. Thanks for your Kind words I am glad you Like the quality of my Kit and the Overall experience.

@everyone If anyone is interested in a (now 90% preassembled Base) - There will 2 standard (petg-cf Gimbal) and more affordable Versions be ready to Ship next week. PA12 Gimbal Upgrade is Always possible.

PM for prices, Details and Order.

Edited by Winger
Posted

2 Standard 90% preassembled bases are in stock and ready to ship.
Shipping to US - 50,-€
Shipping within EU - around 20,-€

  • Like 1
Posted
22 minutes ago, Spatz said:

I hope my normal rhino will break soon - then I will buy your version 🙂

hehe, better sell your rhino to mitigate Monster cost mate.
The Rhino wont break so fast. Its very well built and great piece of hardware!

  • Like 1
Posted

Got this awesome piece of hardware from @Winger, and after 1st day of use I am superhappy with it. 

Putting it together was a piece of cake with help and guidance from David @Winger Very helpful! 

The 3D print quality is top notch! 

Using it on a DOFReality H6, and with qr4rigs mounting system it fitted easily onto the main frame. 

The base is strong, sturdy and feels over the top. Bye bye Moza AB9

20250314_103154.jpg

20250314_103423.jpg

20250314_103211.jpg

Posted
On 3/14/2025 at 8:02 PM, ButterSausage said:

Got this awesome piece of hardware from @Winger, and after 1st day of use I am superhappy with it. 

Putting it together was a piece of cake with help and guidance from David @Winger Very helpful! 

The 3D print quality is top notch! 

Using it on a DOFReality H6, and with qr4rigs mounting system it fitted easily onto the main frame. 

The base is strong, sturdy and feels over the top. Bye bye Moza AB9

20250314_103154.jpg

20250314_103423.jpg

20250314_103211.jpg

Hey MAte, thanks for the feedback. Very much apprechiated. A very neat rig you got there. And the monster fits just perfect.
@everyone there is 2 more standard issue kits about to become ready to ship. So shoot me a PM when youre interested.
1 Premium Issue Gimbal will become available at the beginning of April.

  • Like 1
Posted (edited)

Preassembled 86blf04 compatible Monster Rhino Kit bases are ready to Ship in stock. PM If you want one

840e9b71-9788-48b6-a9b3-b673e2370319.jpg

Edited by Winger
Posted (edited)

2 Monster Kitbases (standard issue) left in stock.
Premium issues are gone.

Edited by Winger
  • 4 weeks later...
Posted

I just finished a Monster Rhino kit bought from @Winger to replace my OG Rhino and can't stress enough what an absolute quality piece of kit it is. Also @Winger does a greta job of supporting through the build if you're less than confident about anything (like me) so that helped massively. I put a more in depth review on the Hotas subreddit in case you want more details:

 

  • Like 1
  • 3 weeks later...
Posted

I just got my Monster kit from Winger three days ago. Quality is top notch, communication via this forum and Discord was easy, and he answered all my questions.

Now onwards to setting the effects up, tuning and maybe even flying! 😀

 

IMG_1639.pngIMG_1641.png

  • Like 1
  • 2 weeks later...
Posted

Fyi. There is one Premium Edition kitbase ready to Ship.

One Standard Edition will become ready to Ship in one or two days.

  • Like 1
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...