SuperTonique Posted February 2 Posted February 2 Hello guys ! First of all, I'd like to say to the designers of this mod that the Mirage F1 is a very flyable aircraft and it is very plaisant to fly with. But, because there is a "but", I have notice a small bug on the preset channel pannel red and on the U and U-VHF push buttons use. Here is the problem step by step : - The U-VHF push button is selected (green light on), - The green preset channel panel is set on the right channel of the ATC, - The red preset channel panel is preset on any channel except channel 20, - When I press the F1 key (or F3 in compliance with the radio menu presented) to send my radio message, the Red channel number automatically changes to 20 and the Red U push button changes in the ON position with the U-VHF push button passing OFF. - If I try to select again the U-VHF push button on, both buttons (the red U and the green U-VHF) lock in the ON position simultaneously. - Then, with both buttons locked in the ON position(red and green lights ON), it is no longer possible to select one or the other. They are locked ! So I can't say on which radio station I'm transmitting, Red or Green... - If memory serves, only one or the other of the two buttons can be selected. It is not normally possible to have both push buttons in the ON position at the same time. This is the basic principle of selection. Am I the only pilot on DCS to be faced with this problem? if anyone has an idea or even a solution, I'm interested. Thank you and enjoy your flights
Solution MAXsenna Posted February 3 Solution Posted February 3 @SuperTonique Wild guess. Have you enabled Easy Comms in the DCS general settings?
SuperTonique Posted February 3 Author Posted February 3 You're right, I hadn't thought that the option had been validated in the last update. Without the option, everything works normally now. Thanks for the help! 1
MAXsenna Posted February 4 Posted February 4 3 hours ago, SuperTonique said: You're right, I hadn't thought that the option had been validated in the last update. Without the option, everything works normally now. Thanks for the help! When the new DCS Launcher was released, it did reset some settings back to default. Easy Comms was one of them. Maybe that's related. Happy it was an easy fix though.
Recommended Posts