Mr_Burns Posted February 19 Posted February 19 Hey I am working on this, I am very green to Fusion and 3d. My idea is to create this that a basic USB3 ebay monitor slides into, monitor I have is about 27cm by 19.5cm but thats irrelevent right now. Its printed in 4 parts but I am yet to join then for gluing but thought I would share my weekends work anyway, if anyone is interested and wants to improve or make changes, please share them. I thought I might be able to reduce the center 'gap' and make the screen capable of doing the right hand instruments but doubt that will work with the angle of the screen, also room for a small RWR and the screen for the F-16 UFC, maybe the right hand panel could fit a Frankenstein UFC in a workable position? But just something to add, Autodesk Fusion free. Thank you. Left Hand Glare Sheild v29.f3d
Mr_Burns Posted February 25 Author Posted February 25 (edited) Just a note on that file, I printed the first one to test it and it might be flex or my poor design but the screen easily slides in the top but not at the bottom so I will need to cut some off it. Also, its nice and sturdy, but used a 3/4 full vat of resin just for the left MFD, part 1 of 4, might be able to hollow it but I think the weight will hold it as a free supported desktop. I also added some steps to glue them together but still need to put holes in for the usb and power cables from the MFD and Screen. Small update here but note its NOT got holes for usb and I have NOT increased the gap for the screen to slide in. Cheap screen I have is a BNZTRUK USB 3 from ebay. RHGS for printing.stl Right MFD.stl LHGS for printing.stl Left MFD.stl Edited February 25 by Mr_Burns
Recommended Posts