Help... not sure how to get started with the crystal super

[Gun Jam]

I think my super is arriving a bit sooner than expected... like tomorrow.

I need some pointers are how to get the most out of this with as few mistakes as possible i dont have unlimited time. Everything was lined up and I was going to just follow the tallymouse setup for DCS but It looks like at least a good part of that is invalid now due to the new pixmax play software.

1) Do I use the new pixmax play or is that a waist of time? It sounds like it has some advantages but overall is worse... I dont recall anyone saying it was better overall. So im confused about this.

2) If using the latest PP software is indeed a poor starting point Do I use the version from tallymouse guide or is there a later version that is better? If I should be using the version from tallymouse or one that is compatible with his guide can you please link it?

3) is there some other route I should be following to get the best dcs experience out of this using DFR. Is there a guide for this route.

 

I really really want to avoid another VR1 mess I watched that thing get developed for a year and a half and 2 months before it arrived I had a plan figured out and by the time it arrived software was updating and nothing worked, eyetracking was not great, open xr didnt work, steam was better but didnt support eyetracking which wasnt working well anyhow. I see that trying to repeat is self now but this time Im thankfully not the first and there is actually a functional community support on the forum here because more than 3 people own one. That larger community is more important than you might imagine at first... a never discussed pro.

 

Thanks!

Edited 17 hours ago by Gun Jam

[Marshallman]

List your specs please.

 Personally still on PP 1.40 , my specs below. I have tried the pp right through to the hotfix but slight stutters occur .There are a few others that have rolled back.

I followed Tallymouse setting generally but didn’t delve into the  API ? layers and writing code into DCS . I also use nvidia to select the K  setting for Dlss .

The latest nvidia update was causing problems as well so i rolled that back too.. 

I’ll sort settings later for you which on my setup gives 90 fps on most maps.

I’ll also tag some worthy chats on here too

Best being Pimax Play v1.41.1

Regards

 

 

 

 

 

Edited 13 hours ago by Marshallman

[Gun Jam]

64gb of ram, 13900k and a 4090.

Thanks for looking into this for me! 

I guess the real question is do I start with Pp 1.40 or 1.41.1

 

[Marshallman]

3 hours ago, Gun Jam said:

64gb of ram, 13900k and a 4090.

Thanks for looking into this for me! 

I guess the real question is do I start with Pp 1.40 or 1.41.1

 

IMO 1.40 initially . Specs are good

Start there… I’ll send my settings later.. 

[j9murphy]

I didn't have any problems with the install, but I think you'll find about as many opinions as people you ask lol.  

1.  I started by removing EVERYTHING related to VR from my PC.  Is this your first VR headset? if so, you can skip that step of course.  

2.   rebooted

3.  Installed PiPlay (i installed the latest), rebooted, started piplay again

4. Connected the headset for the first time - I did not connect the headset to the computer before installing piplay

5. registered and updated firmware, rebooted again

6. Configured my initial settings in piplay, configured play space as sitting/large, high resolution, turned on eye tracking and calibrated, set IPD, turned on dfr, added a little sharpening, made sure I saw the space scape in the headset - rebooted again

7. ran DCS the first time. no problems for me. Since I was on the latest version i wanted to see if I could get DCS to work before adding the mbucchia stuff back.  was able to play DCS at 90fps in instant action no problem.

Challenges I had along the way...

- studioform comfort stuff is mandatary in IMHO, the headset is unusable without it.

- really takes some fooling around to learn how to put the headset on and get comfortable while looking through the sweet spot, have to really crank it down to get a decent fov

- if the chaperone comes on while in DCS it will cut your fps in half, you need to make sure your playspace is taken care of so it wont come on while your playing.

- I still plan to try with the mbucchia stuff instead.

 

13900k/64gb/5090

[Gun Jam]

Im running the G2 right now. My last new headset was the VR1, that didnt workout and ive uninstalled its software.

I dont have any version of PP installed now or ever

I do have WMR installed to run the g2 I hope I can leave that.

It sounds like you are having good luck with the current version. I have the open Xr tool kit installed and maybe openxr for wmr.

It sounded like the older version of PP gave smoother performance but with similar specs if you are getting the new version to work I might consider trying that... not sure yet. Thanks for the quick guide. Ill be using that. 

[j9murphy]

1 hour ago, Gun Jam said:

Im running the G2 right now. My last new headset was the VR1, that didnt workout and ive uninstalled its software.

I dont have any version of PP installed now or ever

I do have WMR installed to run the g2 I hope I can leave that.

It sounds like you are having good luck with the current version. I have the open Xr tool kit installed and maybe openxr for wmr.

It sounded like the older version of PP gave smoother performance but with similar specs if you are getting the new version to work I might consider trying that... not sure yet. Thanks for the quick guide. Ill be using that. 

I removed everything - WMR, open composite, all the mbucchia stuff, and all my oculus and meta stuff before installing pimax play - i did leave steam installed.   I'm also on the latest version of windows 11 - did you stop updating to keep running WMR?  There will be a steam alternative to WMR coming out soon that mbucchia is working on.