Renko Posted Friday at 07:25 PM Posted Friday at 07:25 PM (edited) If you enter DTOS mode, the logic is that TMS Up is to ground stabilise. That works. BUT if while i'm ground stabilised i press again TMS Up it seems that it updates the position, and the TD Box moves position. I think that should not happen. In the track i added first i use the HMCS, and each time you see the TD Box jump is when i press TMS Up. It seems to follow the Aiming Cross. I dont think that should happen because the TD Box should not move, just update the coordinates. For example to create a MARK point TMS up is to update the coordinates. If i ground stabilise and move away the Helmet Aiming Cross and press TMS Up, the TD Box will not move to the new Aiming Position. Wouldn't it make sense for the logic to be the same for both situations? Not 100% sure on this one. But then in the track when i use DTOS with the HUD. After ground stabilised the TD Box, you will see the box jump and jump each time i press TMS Up. I dont think each time i press TMS Up it should jump, and this time there is no aim cross. Just the HUD. Best regards! DTOS_TMS_up_Issue.trk Edited Friday at 08:51 PM by Renko
Recommended Posts