hreich Posted January 28, 2011 Posted January 28, 2011 Can somebody please check my setup for FreeFalcon. The setup should be like this. I am using layers UMD with ROCK BOAT SWITCH - they are set like this: BSB is AG mode - in falcon key backspace - switches to ag mode, selects gun (rock boat switch back position) BSM is Nav mode - in falcon key 5 (which i am using as ICP NAV button) which is ICP NAV button (rock boat switch middle position) BSF is AA mode - in falcon key enter - switches to aa mode, selects gun (rock boat switch forward position) I am also using IO mode for shifted/non shifted states - for this purpose i am using S3 button. Now i have problem.. When i switch to master mode to AA, NAV or AG my UMD layers dont switch as they are supposed so. I have set my povs on throttle CSU/CSD/CSR/CSL to have different functions in dependacy of currently selected master mode (AA/AG/NAV modes).. So when i switch rock boat to fw position it sends enter key which selects gun and master AA mode, or when i switch rock boat to back position it sends backspace key which selects gun and master AA mode, But sometimes my programmed CSU/CSD/CSR/SCL pov functions dont work well.. When in AA mode (rock boat switch is in forward position) - CSR/CSL should have function of different AA RDR modes.. When in NAV mode (rock boat switch is in middle position) - CSR/CSL should have null function.. When in AG mode (rock boat switch is in aft position) - CSR/CSL should have function of different AG radar modes.. Sometimes i have to move rock boat switch twice to upper postion for my CSR/CSL/CSU/CSD pov buttons to work properly.Free Falcon HR.rar [sIGPIC][/sIGPIC] Pilot from Croatia
Recommended Posts