NdR Posted May 15, 2012 Posted May 15, 2012 Hello fellow pilots. I am reading the eagle.ru forums for some time, now it is time to ask You something... As I am modifying the pit, I need a holes for my upcoming TM Hotas Warthog. I have found a dimensions of the throttle plate here: http://forums.eagle.ru/attachment.php?attachmentid=64877&d=1334670526 but I miss the five holes for the fi4,5 holes for the screws. Do any of You would be so nice to provide the exact details of the holes placement? Many thanks!
MTFDarkEagle Posted May 15, 2012 Posted May 15, 2012 Hello and welcome to this forum! The only holes you need are the 4 on the edge, which are given on that sheet. The other 5 are for mounting the plate itself to the throttle unit I think. Lukas - "TIN TIN" - 9th Shrek Air Strike Squadron TIN TIN's Cockpit thread
Rockeyes Posted May 15, 2012 Posted May 15, 2012 (edited) Im not sure what you mean but if you are talking about the joystick the main base plate screws are. the throttle is as MTFDarkEagle said :) Edited May 15, 2012 by Rockeyes [sIGPIC][/sIGPIC] HTC Vive Windows 10 Maximus VIII Hero i7-6700k CPU @ 4.2GHz 16GB Nvida GeForce GTX 1080. Ram Duel SSD's
NdR Posted May 17, 2012 Author Posted May 17, 2012 Hello and welcome to this forum! The only holes you need are the 4 on the edge, which are given on that sheet. The other 5 are for mounting the plate itself to the throttle unit I think. Hello! I'd prefer the inner holes, because one won't see the mounting (it will be tighten to my platform from beneath) and I will be able to detach the ballast from beneath the controller. Im not sure what you mean but if you are talking about the joystick the main base plate screws are. the throttle is as MTFDarkEagle said I already have the mounting for stick ready, 110mm diameter circle with four fi4,5mm holes for mounting the stick itself- there is no place for this huge plate. I already found it difficult to enter the cockpit. Thank You guys for the help so far
Recommended Posts