manfrez01

Thanks to everyone for the tips. This is the result without manually editing files FC. I must say that it feels a little noise when the card will load the graphics, I think I said that's normal evga plates. Regards:thumbup: PS: some advice...

Interesting point. I was wrong in my observation. Basically what I want is a Control Panel settings on my videocard for quality and performance. Thanks in advance:thumbup:

A ver distiler: Ya tengo una gtx 460.:music_whistling: Lo que busco es una configuracion que mantenga simetria entre performace y Calidad. Gracias por tu respuesta-.:smilewink:

Lords I'm trying to find the configuration of my new board to achieve performace and quality. If anyone has this bb perhaps they can help me with some advice on configuration. My specs are evga gtx 460 1gb, 4gb DDR2 800MHz in dual chanel a couple. I'm currently with 1x16 pci-e slot, which lost 2% and bottleneck for not using a pci-e 2.1. CPU (Core 2 Duo E6750 2.6) For now FC2 runs well but as I explained it is best achieved between 30 and 40 FPS, as the human hojo not detect changes over from the 30 PFS and therefore can make some quality. Greetings and thanks

Que tal Señores:) Estoy tratando de dar con la configuracion de mi nueva placa para lograr performace y calidad. Si alguien tiene este bb talves pueda ayudarme con algun consejo de configuracion. Mi especificaciones son evga 460 gtx 1gb, 4gb ddr2 800MHZ un par en dual chanel. De momento estoy con slot pci-e 1x16, lo cual pierdo un 2% e cuello de botella por no usar un pci-e 2.1. CPU (core2duo E6750 2.6) De momento corre bien el FC2 pero como ya me explicaron lo mejor es lograr entre 30 y 40 FPS , ya que el hojo humano no detecta cambios superiores a partir de los 30 PFS y por ende se puede ganar algo de calidad. Saludos y gracias:thumbup:

Oustanding job:thumbup:

fc2 compatibility between DCS-BS and DCS-A-10 only for the 25t and 25a.

Yes i so that to but joey45¡¡¡¡:megalol: Maybe it help somthing:huh:

would need to delete the account name "manfrez" because it is the same as manfrez01. I forgot my pass and I forget time and register my nick as manfrez01. Thanks in advance

-What exact projection is the map in LockOn? What are the standard parallels? The FC 2 would be used for the ellipsoid the Krassnovsky and referred to Pulkovo 1942 proyection. -Is the map referenced to true or magnetic north? What is the HUD referenced to? I think is refered in tru north -Is the scenery based on real geographic data, so any ordinary mercator-projection would do the job? Yes is real geografic data( i used Oziexplorer to georeference the chart of TC-1(igormk2010) and have 3' of error. Hope this can help good luck Edit:In the chart the blu line is for WGS84 Coordinate and the black lines are for Coordinate geografic refered to Pulkovo if you whant more info check this post http://www.ecv56condor.com.ar/Foro/viewtopic.php?TopicID=38946 Im traing to explane this considering my Info and espect some help to enlighten this things hope you understand a littleof spanish .

Gracias desing:thumbup: //////////////////////////////////////////////////////////////////////////////////// Ah ojo de buen cubero voy a tratar de aprender rapido este lenguaje, va ser un largo proceso Esto por ejemplo es de la carpeta \Config\Map\MapCoords.lua -- Zero point (meters) zeroX = 5000000.0 zeroZ = 6600000.0 -- Internal relative values for map projection corners (meters) centerX = 11465000.0 - zeroX centerZ = 6500000.0 - zeroZ pnSxW_X = 4468608.57 - zeroX pnSxW_Z = 5730893.72 - zeroZ pnNxW_X = 5357858.31 - zeroX pnNxW_Z = 5828649.53 - zeroZ pnSxE_X = 4468608.57 - zeroX pnSxE_Z = 7269106.20 - zeroZ pnNxE_X = 5357858.31 - zeroX pnNxE_Z = 7171350.0 - zeroZ -- Map borders (degrees) EndWest = 24.0 EndEast = 42.0 EndSouth = 40.0 EndNorth = 48.0 -- Used for the sky position LatitudeCenter = (EndNorth + EndSouth) * 0.5 LongitudeCenter = (EndEast + EndWest) * 0.5 -- Greenwich time displacement (hours) for the Sun, stars, etc. WinterTimeDelta = 2.2 SummerTimeDelta = 3.2 Tendria que empezar por embeber este codigo me parece pero no estoy seguro, todavia no lo interpreto . Saludos. :book:

Hola Design Alguna idea de como tengo que encarar esto de exportar los archivos .lua:music_whistling: y no morir en el intento.

Hola a todos¡¡ Tengo curiosidad por saber si es posible exportar coordenadas de flaming Cliffs 2 en tiempo real, de modo de utilizar un monitor extra como ABRIS similar al k-50 para georeferenciar mi posición en un sukhoi 27 por ejemplo, tomando como base la carta de igormk TC-1.png(igormk2010). Me encantaria obtener este efecto en mi cabina. http://www.youtube.com/watch?v=Qx_uIMBO_c4&feature=related Saludos:thumbup:

thanks for reply. I hope this the project, "mod" of kegetys, in the future make reality cockpit clickable in fc2. Its a dream of all fan of FC series. ps: Make this reality:thumbup:

Can someone explain how this works :cry:?? http://www.youtube.com/user/Kegetys :music_whistling:

Yes, my frend i have instaled ppJoy but only works when i have this settings (safe mode) on windows 7 64 bit I need to do this for work properly First i need to do this CMD BCDEDIT -SET TESTSIGNING ON and reebot sistem then-... windows allows me to use all on FC2 and it work but only in windows safe mode. Thanks in advance ;)

I'm trying to make it work in Win7 64 bit but I realize that until the moment one walks in the test mode:cry: when i run in normal mode i tryit to lock virtual joystick and bringme a error to find virtual joistick http://img190.imageshack.us/img190/5503/gafga.jpg Can you Illustrate the tutorial;) I run FC2

:helpsmilie:

Hi there :noexpression: Is there any way to obtain these data " geographical coordinates"on my Saitek X52 MFD common, From FC2. I need so much this, to fly more acording to my chart. I'm trying to navigate without pre computed crossing points, i read some topics (so confused:cry:) and there are a way to use de LUA files to get acces that information on my saitek x52 go through MFD (by the way is not Saitek PRO). Thanks in advance Folks :book:

Well igormk, Once again your answer is sharp as a knife. Thanks for the Info i rest in pace to you final work.:thumbup: :book:

Sorry friend but you make a mistake by confusing datum(that can be a marginal information or , we use Example datum support for such triangulation points or nodes are used to give reference to planialtimetric and cartographic poses, such Altitud,lat.Long,etc. this is a net for support studies) with projection systems (WG84=World Geodetic System 84)that is what I ask so. Each country chooses its projection system in accordance with their geographical distributions In Argentina used the projection system of Gauss Kruger whether or POSGAR Inchauspe. Wath im traying to ask is What sistems of proyecction they use at this chart :book:

Copy igormk Thanks for the fast reply:thumbup: One last question... What type of sistem of coordinate do you use for this chart... WGS84 perhaps :book:

Hi my frend Can do a simple suggestion, if you can remember that all the marginal information in a chart on a scale of 1:500 000, the standard is in the bottom of the table, i'm refer to the two Part graphs lower left of the map I think they are reference to airports landing instruments, I can not distinguish graphic or funtion of the other. These should be provided outside of the letter for better reading and location of points on this sector. Thank you very much for your work from now on.

Me to Thanks ED:thumbup: :book:

same to me ...still without a serial. Maybe latter just patience.....:cry: