olekrow

Would like to move DCS world from small ssd with os [ running out of room],to a larger ssd can i just delete the original and just down load and reinstall on the larger ssd? also how do i deactivate the modules or do i have to ? thank for your help; olekrow

collective sensitivity Fellow simmers: I to have a problem with the collective . Ihave a CH throttle pro and it works fine with all the other planes in DCS including the MI8mtv. I have full throttle on the control indicator on all but the HUEY,on the HUEy I dont have any lift until about 3/4 the way up the indicator. I really only have the upper 1/4 of the indiactor to control the HUEY .Ihave reinstalled the mod tried every thing with the controllers but no joy .Ireally think it must be in the sim it self. Iam about to give it up.But I really do like the HUEY. Regards OLEKROW

ADF/PROBLM Gentlemen: Thank you for the information ,sorry didn't know how to up load the track.Aiso thanks for the navigational aid the NDB/ILS etc.will be helpful. After going back and checking in the flight manual I wasnt turning on the "inverter"it works ok now. thanks again olekrow.

Fellow Pilots: I have been watching Wess28s ADF/VHF FM tutorials but I cannot get my indicators on ADF or VHF AM to move. When I dial in an NDB or call number from downed pilot,is there other operations to do before using these radios? would appreciate any help. thanks; olekrow

Hello Hog pilots: cichlidfan "THAT WAS IT" THANK YOU SO MUCH! Ihave spent hours trying to find the problem it really means alot to get the sim mode working.And to the rest of you pilots THANK YOU! for your time and help.

Itried that but the keys still would not respond thanks again

Mr d.burnette: I checked the system tab been there many times "dumb me",but there is no disable aero interface there.all i can see is shadow tree/vsync/full screen/cockpit shadowing/TSSAA.whats up? i am running 1.1.1.1

Gentelmen: Thank you for your input,after adding some enteries into the sim layer the buttons and axis do work in simulation mode,but the keys on the key pad wont respond.I can start the sim by mouse clicking the check mark in lower right hand corner,but i cant get out with out using ctrl/alt/delet.I tried mapping END MISSION to ESC but couldnt get to work.also when in training missions when ask to press space bar its no go.kinda puts a damper on playing in sim mode Mr burnette with out sounding to dumb where do i find the graphics menu to try your suggestion? . Mr Randor your suggestion does work but iguess i can get into the sim by clicking on the check mark thanks to all of you!

Hello hog pilots: I can not get any buttons or keys to respond in simulation mode,every things works fine in game mode.I cant start the simulation by pressing the pause/break key, but if i mouse click on the square in the lower right corner the sim will run and the axes work ,throttle, stick etc.but no keys or buttons on the controls will respond why they will work in game mode and not in simulation is beyond me. I have tried all kind of things but they wont work any ideas?"Icould sure use some" thank you for any help. olekrow

Hello all: thought i would let you know what i found i was missing a 64BIT driver got that installed and every thing worked fine. thank to you all for your input olekrow

In the tracker 5 soft ware i have trackclip checked( i have a clip on my hat),in my trackerir 4 pro there are track clip pro,vector and dot the vector is checked.when i bring up trackerir 4 pro on the front below trackerir pro is "vector enhanced" should that be?in trackerir home sight i saw something about vector enhanced was for trackerir 3 only

Hello: I received a priviate email concerning this post and not knowing how to reply i think i messed up" so i am answering here hoping you see it and accept my apology .Inregard to your questions,i have trackerir 4 and it has one light above the camera and a blue led at the bottom,they all work as to the manual,my lighting is above and slighty behind the camera,something i just found out tonight, the camera works fine in game play but theres no pitch or yaw in simulation.I have been trying in simulation which i really want to work,do you have any suggestion on this? Any one else have any suggestion all are appreciated Thanks to all.

TrackIR 3 & 4 Front Status LED : Off : NO clip is being tracked, and TrackIR Enhanced output is NOT paused. Green : A clip IS being tracked, and TrackIR Enhanced output is NOT paused. Orange : A clip IS being tracked, and TrackIR Enhanced output IS paused. Red : NO clip is being tracked, and TrackIR Enhanced output IS paused. Flashing Blue or Green : Low power or stand by mode. Blue Case LED : Off : There is NO TrackIR Enhanced Title (game or simulation) running. Glowing Blue : A TrackIR Enhanced Title IS running and has registered with the TrackIR software to receive tracking data. Note : If the Case LED has been disabled in the Tracking : Settings window, it will not turn on. Hello: I have versiuon 4.1.028 on a disk i run it then down loaded 2.2039 installed as admistrator,then downloaded 5.2 then installed it as admistrator,i click on trackerir then click on DCS simulation also click as admistrator my trackerir camera lights works just like the above taken from the manual i go into DCS A-10 every thing looks good i can click on center/pause the lights work like they should , but there is no head movement pitch or yaw. would it be possible there is something missing in the sim? I down loaded the files from Eagle dynamics installed them in order in a folder then ran the installer i dont know if i ran this file as admi. or not butdown loaded ok . i also started up lockon flaming cleffs 2 on another computer i have ."32 BT" and trackerir worked fine i dont know where to go from here(fellows i sure appreciated your help. thanks so much).

Yes i right click on the short cut then advanced and click on run as admi. ps-i really appreaciated your input on this i cant seem to figure this out,

FOXFIRE TWOONE: Thank you for your quick response i have 5.2 final installed with 4.2039 final i also installed them as administrator ,trackerir is plugged into a powered hub."thanks again" this has got me pulling my hair out.(what i have left.

Hello: I see on this forum that you guys are using trackerir just fine but i have tried every thing but i cant get it to work at all. when i turn trackir on every thing on the screen works fine but when i go into DCS a-10 its like trackir is locked up. i can can use the pov button and pan around ok but when turn my head nothing changes. i have version 1.1.1.1 windows 7 home premium(64Bit),intel core i7 3770k 3.50GHZ,asus sabertooth Z77 mother board,8 GBDDR3 memory,800 watt power supply,2xsli Dual (nvidia GeforceGTX 670 2GB my trackir is version 4.1.028 and i down load and use version 5 soft ware. If any one can help me i would really appreciated it. Thank you in advance olekrow

Nate Thank you for your help, that is what it was.Sometimes a simple thing can be a real headache. I think its great that there are knowledgeable people that are willing to help others when they have problems. I am 79 years old and sometimes things slip by me pretty easy. Again thank you so much,and have a great day. Bill olekrow

Dear Sirs: I just bought Flaming Cliff 2 and installed it on my computer. I have some trouble getting it set up with my CH Hostas in control manager, so I gave up and used setting in game, which is ok. My big problem is I can't get Trackir to work in game. I have tried everything I can think of, but no luck. It works fine in Lock-on modern air combat and micro soft flight sim x. I found a thread that said to right click on exe file when launching and click run as administrator. I did this but it didn't help. If someone could help me through this I would greatly appreciate it. Thanks so much. Bill olekrow