ISantus

For anyone following along, I was able to use the new VD beta and that seems to have helped a lot. I am not sure if it is the software or if uninstalling VD and reinstalling (with the new beta) has helped. Right now I am checking it out and almost completely stutter free. Time to start fine tuning but I am over the initial hump of even get it to work to a minor degree.

I attempted this morning to run a separate 5ghz router dedicated only to the Q3. However, I am still getting latench of 70ish ms. With everything on the lowest possible settings in DCS and still getting skips and stutters, I am starting to think that wireless is not an option with the current state of hardware. I ordered a link cable to see if that fixes the latency and skipping issue. If it doesn't solve the problem, then there is a setting somewhere else that must be impacting performance.

This is what I had run into last night. I know DCS supports OpenXR natively but I had been using the toolkit to make further adjustments with my G2. I am unable to get the toolkit to work when running via virtual desktop.

I have been using a G2 for several years and have been looking for an opportunity to upgrade to something with wider FOV and edge to edge clarity. I can't afford Pimax crystal, but truly wanted DFR and OLED. None the less, I have purchased a Q3 to test it out and see if I like it. I consider myself technology capable of quite a bit and had my G2 tuned really well. However, I am struggling with my Q3. 2 days of ownership and I am ready to go back to my G2... System details: 7800X3D 4090 64gb DDR 5, 6000 DCS dedicated M.2 drive Windows 11 Fully updated with all drivers and system files Here are a few questions I would prefer wireless if possible, but I can't get it to run smooth even with everything in DCS tuned as low as possible. Even with ASW on, I still get bad stutters (about every 3 seconds) and unplayable. For wireless should I be utilizing AirLink or Virtual Desktop? I am running on a 5ghz router but could this be causing issues? Should I look at a Wifi6e router? I had OpenXR toolkit working for the G2 but I can't for the life of me get it to work with the Q3. Any ideas as to how I get it working? Is there a best practices guide of some kind to get the Q3 running properly either wired or wireless? I have searched high and low and I can't find anything that seems to cover the steps well enough for me. Should I be turning on ASW/motion reprojection through the Oculus App, Oculus Debug tool, or OpenXR (once I get it to work)? Should I be messing with the Oculus Debug Tool at all? Additional points of reference Utilizing DLAA PD 1.0 Most settings meduim to high Utilizng Godlike in Oculus and aiming for 72hz I am sure I have missed something else TYIA for your help. I really want this to work to experience it and make an educated decision on keeping this vs. the G2

My new system (ASUS X670e-e and 7800x3d) has been the most stable system I have ever built. I have built at least 10 systems. I quickly adjusted voltages manually but otherwise I have been happily running EXPO and -30 PBO without issues. I'm watching curiously as this all unfolds, still running on 1303 BIOS.

Just ordered my parts to upgrade to the 7800x3d. Coming from ASUS X570 Hero and 5900x with 32gb ram and 3090 Moving to 7800x3d Asus X670E-E, 64gb ram and 4090 Here's to hoping!

Unfortunately I don't have the actual dimensions. There is a lot of information out there but none of it seemed to match up. I would imagine a few folks that actually have them in hands would be willing to take a true measurement. I ended up going with the MFG Crosswinds with the WAP and modifying my rig to get them in. They now clear by about 2mm on either side. Just barely. Sorry I cant help you

SOLD

In like new condition. Great pedals but they do not fit in my rig. Asking $400 plus shipping. Includes original packaging, cable, manual, and all parts. Amazing pedals that I wish I could make work, but they are too wide for my setup.

I am looking to replace my garbage TFPR rudder pedals, BUT I am limited by my cockpit rig width. Originally I wanted to go with the TPR pedals, but they are too wide. Then I saw the Crosswinds V3 with the WAP (width adjustment plate), but that only gets me down to 465mm ish. My rig only allows for something up to about 430mm. The only setup that I am seeing that seems like it will work, and be an upgrade, is the TurtleBeach Velocity One pedals that have adjustable width. These pedals do not excite me as they are all plastic and seem cheap, but are likely to be an upgrade from the TFPR set I currently use. They at least use a Hall sensor. Does anyone have any other recommendations that are solid build that will fit under 430mm in width? For reference I am using the Next Level Racing F-GT rig and have heavily modified it to accomodate all of my other systems.

For anyone interested, I solved my own problem. I set a keyboard bind (LAlt+LShift+up) for increase and (LAlt+LShift+Down). I then set three bingo parameters "Set Bingo to 5000" holds Increase for 6.3 seconds "Set bingo to 0" holds decrease for 6.3 seconds "Set bingo to 3000" holds increase for 4.3 seconds The only problem is that if I am in 5000 bingo, in order to set 3000 I have to first go to 0 then back up. This is a solid enough work around for me at the moment.

I am slowly working on getting rid of any need for a mouse in my VR cockpit. One of the few remaining items that I am trying to figure out is how to set my joker and bingo fuel states using voice attack. Does anyone know of a way to program Voice Attack so that I can say something like "Set Bingo to 5000" and it will set my joker or bingo state on the IEFI in the F18?

Still looking if anyone has anything.

SOLD

Includes original box and cables. Great condition and an amazing card. Willing to split shipping. I am in Michigan. I also have a video of the unit in working condition but it is no longer in my system as the 4090 has taken its spot. With MT finally here, your CPU is no longer the bottleneck. Time to upgrade that GPU! I also have a Corsair HX850i that I am looking to sell if you need something to power this beast. $750 + 1/2 shipping.