Nishiyandcs4

@cfrag, the DML was a wonderful and encouraging tool for a Mission editor like me who is not good at programming. I'm not sure how to put it into words, but I’m grateful for the time and contributions you have made to DML so far. I sincerely hope that you can make the most of the free time you have enjoy by withdrawing from DML development and support!!

Dear cfrag, Thank you for identifying the cause & fixing the problem!! CSAR module has now started working properly on the Persistence Mission I'm creating. so, I'm lokking forward to seeing how DML evolves in the future. THANK YOU SO MUCH!!

I'm sorry again,,This is DEMO_Miz that I tested. This is simply DML's CSAR Demo Miz with Persistence added. In SP, the M4 soldier spawns without any problem when the FLAG=100 trigger is triggered, but on a dedicated server running persistence, even in the same situation with FLAG=100, the text 'HELP! Someone killed my Chopper!' pop up, but the M4 soldier does not appear. Of course, if I remove the Persistence module it works fine on the same server. ...Am I forgetting something in the Persistence settings? Modified_demo - CSAR of Georgia.miz

hello @cfrag, Last week, I posted that CSAR could not be excutedvia Flag when using Persistence, and reported that it worked fine after I reconfigured Persistence, but after a few days, I checked and found that it was not actuallyworking. It works with 'autoTrigger', but does not work when changing Flag with trigger. I think there is some code missing after 'then' on line 1486 in the Lua code of the CSAR Manager module, is this line correct? If it is correct, then my problem lies elsewhere, but when Presistence is running on a Dedicated server, no matter what I do, I cannot run CSAR via Flag. I know you may busy fixing API changes made by ED, but could you please take a lokk at line 1486 of CSARManager module. Thank you ＆I appreciate your contributions to DML in DCSWorld.

@cfrag Ah, I finally found the cause. My dedicated server also uses Slmod, and I had set saveDir to the DCS default directory.. When I changed saveDir to Slmod, both CSAR & persistence started working properly. Ofcourse, I also saveDir & saveFileName. sorry for this fuss, I learned something new from this! thank you

@cfrag I tried the attached Demo file in SP and MP on dedicated server. The results were that both worked exactly the same and could be used without any problems. So, as I posted before, I added the DML persistance module to the Demo File and tried it in SP & MP... SP - No problem, worked fine! But on the MP on Dedicated server, the message"Help! some trigger killed my chopper!" was displayed, but the M4 soldier didn't appear, and nothig happened when I went to the place where he was supposed to appear. This makes me think that the persistence problem may be affecting the CSAR module after all OK, I'll try it & see how it goes!

"working" - just as explained by the DML, when the FLAG is turned ON, M4 soldier appear, smoke is released, the enemies approaches, they ( M4 Soldier) are rescued by Helicopter and returned to the CSAR BASE, just this TASKs complete. "doesn't work in MP" means that even when the FLAG is ON, no M4 soldier and enemies appear, nothing appears, and the CSAR info only displays a message like "NO One needs rescue, everyone is safe". However, behind the scenes, only the cooldown timer (from RadioMenu Module) that occurs when FLAG is ON running. ...my English may be a little bit strange and it may be difficult to convey my meaning, but that's about it.

@cfrag The issue of CSAR not working in MP also seems to be caused by the persistence module. After removing this module, CSAR started working in MP on dedicated servers.

CSAR didn't work on the dedicated server, so I tested the MIZ file on SP and it worked, i ran it again on the dedicated server, but in MP the M4 Soldier didn't appear. However, the flag itself worked, and only the cooldown timer by RadioMenu was runnning. The only difference between SP and MP is whether or not persistance by desanitization is running. Also, there was a post just now asking whether there was a persistance problem due to Herc Mod, the Miz File I'm running where CSAR doesn't work on MP also uses Herc mod(and UH-60L mod) this could also be one of problems. I'll try removing those mods and testing it again on a dedicated server.

Hello cfrag & everyone! I noticed that CSAR in DML works in SP but not MP. I have all CSAR-related modules up to date. Is anyone else experiencing the same issue? The comments in CSAR Manager mentioned something to do with persistance, but are there sny special settings I need to make?

Thank you for your reply and advice! Now that you mention it, I could have simply set it to the enemy side. The area started out neutral, and the goal was to occupy the area before the enemy forces. I'll have to change the method a little, but I'll try it the way you mentioned.

Hello, cfrag! & all the great DCS folks here! First of all, I'm a Japanese DCS player and I'm not good at English, so please understand that the questions I'm going to ask might sound a little strange. (I'm using Google translation) So,Now onto the main topic. I've recently started learning and using DML. I have a question about 'PlayerScore'. Is it possible to turn on the ScoreSafe function only after occupying a specific base? The mission I'm creating involves occupying bases on the map one by one, and once each base becomes my(our) side, clients can spawn from that location, but with ScoreSafe, even if we land on a base that's not my side, we'll still get a score. Is there any good solution? Maybe there is an easier solution than I think, but the DML manual is not in an easily translatable format, so my DCS free time is literally "eaten up" while I try to figure out how to solve the problem... (Maybe I need to study English more, lol) However, I don't want to complain, I just want to know if there is a solution for ScoreSafe. I think DML is a very powerful and easy-to-use tool. I would like to understand it better and use it more. thank you

Thanks for your quick reply! ! I understand your reply. I apologize for repeating the same questions as other members. Anyway, thank you for this wonderful bot.

Hello! Asta. The DBS bot on my server is speaking very well!! but... I have another question, 1)　 Why doesn't "Server Offline" show up when the server is terminated? Even if the server is terminated, the live channel display will remain intact. Any special settings in index.js or BDSGameGUI.lua? 2)　 Is the "Started since" display of the live channel not updated unless there is an event such as someone connecting while the server is running? Is it possible to have the display refreshed somewhat automatically (e.g. once every 5 minutes)? 3)　 Only the file name is displayed when the server is started, but if you change the mission file, the file path without .Miz will be displayed in the "Mission" display of the live channel. I'm running a dedicated server and the files get rebooted every 4-5 hours. Also, players in the server can arbitrarily change the file. In any case, the file path is displayed except at startup. It would be helpful if you could tell me if you have time. Thank you.

Hi Asta! I didn't want to waste my time with too many issues, so I really started over to sort things out. (Including Bot installation, node download, other settings, etc.) Then, mysteriously, the problem was solved all at once, and the Bot started talking 'very very very lively' inside my server. I don't know much about Bots and programming like this, so I still don't know what caused it,,,,, but I learned a lot in many ways. Thank you for this wonderful bot including your response!

Hi, Asta, thanks for the quick response! ! Yes, I have set it up as you said, but the result is the same no matter how many times I run it. In rare cases, "Server Offline" is displayed on the channel set as "Message Live ID", but it is the same display on the CMD prompt screen. Also, sometimes I get an error like "unable to send". It looks like the bot is trying to access channels with these IDs, but for some reason it is unable to access these channels. When I tried CTRL + click on the URL of the screen where the error is displayed, it will be displayed as {"Mesage": "401: Unauthorized", "code": 0}. Is this correct?

hi, Asta! i have tried many times, but no matter what i do, the result is this. i know this BOT is so great, but i'm sad that i can't make it work on my multi server. any idea what might be causing this? (sorry my poor ENGLISH. i'm Japanese.)