Red Yeti
-
Posts
93 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Red Yeti
-
-
On 4/27/2025 at 9:38 PM, Bucic said:
That looks too good
I don't know if I'm interpreting the smiley correctly, but thank you.
-
I couldn't find anything suitable made of metal. So the only option was to make it myself.
The alternative would be to have it 3D printed from aluminium, like _BringTheReign_ did, I think.
-
1
-
-
Wie bereits schon geschrieben, wird vermutlich die Platine defekt sein.
Wenn du jeamanden kennst, der einen Reflowofen hat dann könntest du versuchen die Platine kurz backen zu lassen. Hat bei mir gut funktioniert.-
1
-
-
I finally finished my handle today.
It wasn't that expensive at around €50 for the materials. It was also a lot of fun (except for the soldering! I don't like that at all!)
I turned and milled the tube and the nut out of aluminum in the hope that it would withstand the FFB forces.
Nice tinkering project. Thanks for sharing the files!-
6
-
-
Probably a stupid question but:
How do you print the housing of the trigger?
When I try to remove the supports, I tear the two ‘nests’ of the buttons with them. -
Wow! I didn't expect such a quick response. Thank you very much!
-
1
-
-
Hello @_BringTheReign_
I also want to print the cool B8 handle and have loaded the new version 2.5. I noticed that the handle has 4 holes for attaching the insert. But there is only one hole in the insert itself. Have I loaded the wrong file?
-
I don't have the Sinai map (yet). But the videos are really good. It helps me a lot to refresh my memories. Thank you!
-
1
-
-
On 1/29/2025 at 9:57 PM, _Hoss said:
DILLIGAFF.......
STFU & GTFO then?
-
On 1/4/2025 at 12:00 PM, Krysnic said:
Ручка переключателя пока не совсем понимаю для чего, судя по всему для проверки всех ламп, а там хз.
Похоже, что выключатель используется для отключения всех ламп путем отсоединения земли.
https://www.deutscheluftwaffe.de/fl-32526-vierlampengeraet-1944 -
The reason why such extensions are not available is simply that the pipes cannot be bent in such tight radii. Especially the end piece to which the stick is attached.
This then has to be welded which would increase both the effort and the price.I am looking for a similar extension but I will probably have to make it myself.
The version from propeler is good but I don't like the look so much.
-
1
-
-
I just played the mission with the BS2 a few days ago and it took me a few tries as well.
I had to ambush the first helicopter and fight it with two Vikhrs. When the second helicopter noticed me and flew towards me, I had to switch to AA and HeadOn, otherwise the Vikhrs would miss. If the second helicopter was too close, I had to turn round and run until some distance was built up.-
1
-
-
According to ancient Mayan prophecies, it will be possible to fly the reworked MiG 21 BIS in Half Life 3.
-
6
-
2
-
-
Das sieht gut aus. Ist das Gehäuse aus Metall?
-
Which joystick handles can withstand the higher forces? Are there any experiences or recommendations for or against a certain grip?
-
1
-
-
I like the square buttons with transparent caps that VirPil uses on the SharKa50. The tactile feel and feedback when pressing them are excellent. I’d like to use them on a DIY control panel. Does anyone know what type of buttons these are and where they can be purchased?
-
I'm sorry. I don't know how to implement this without additional software (AutoHotkey or similar).
-
I'm not sure if I understand you correctly. Do you want to switch between the modes with a push button?
-
I also noticed the following: If I set the weapon mode to manual and activate the Igla (countdown is running), the Igla does not acquire any target. If I set the switch to auto mode (and back to manual mode) then the target is immediately acquired.
-
Is there any news on this?
I keep wasting Iglas with this combination. And the missing gunsight doesn't make aiming any easier. -
Why don't you just use the same binding as the C key on your keyboard?
-
This bug is still present in the current version 2.8.2.35632.
-
It seems that all keys on the data link target panel (the one on the top left) can only be pressed via key combinations if AC-Power, K041 and the PVI800 are active. Otherwise, the animation of the pressed keys is not displayed.
The keys can be pressed with the mouse and the animation of the pressed keys is displayed at any time.
-
I see it now. It is an error of understanding on my side.
Alt + T activates hover which then automatically activates Alt-Hold mode. Alt-Hold can be activated and deactivated with LShift + A as it should be.
The topic can be closed.
Ka-50 - Shkval jumps after a target is destroyed
in Bugs and Problems
Posted
I don't want to push after almost one and a half years, but how good are the chances that the bug will be fixed before BS 4.0?
It's a lot of fun when you sneak up on the target in MP for 20 minutes and then just watch the Shkval start playing ping pong.