Kaaboom

Ok tnx Послато са SM-G955F уз помоћ Тапатока

Can I just copy DCS 2.5 folder to SSD? Послато са SM-G955F уз помоћ Тапатока

I am trying to install my modules (v2.2) but when that pop up window with checked modules shows up and I hit install game always crash to desktop Послато са SM-G955F уз помоћ Тапатока

Hello.I can see that ping in Nevada MP is much higher then 1.5 Caucausus MP? Is there any solution for that or what? Послато са D6503 уз помоћ Тапатока

If Bios upgrade doesnt work,make new OS installation from the scratch.Thats always help. Послато са D6503 уз помоћ Тапатока

But.....still stays problem when runing script and throttle behavior.Is it normal that "combined" device in GUI device analyzer have (root) in the end of the name? Послато са D6503 уз помоћ Тапатока

I've tried all that already but nothing.Contacted TM but they said that I need to be patient about this and on the end I resolved problem with new OS instalation from the scratch

:cry::cry::helpsmilie::helpsmilie:I actualy have 2 pairs of TM warthog devices in HID tree...Two named HID game controllers and 2 named with real names TM warthog throttle&joystick When I tried to disable HID ones. devices stops to work and lamps shut off and same thing when I disable named ones

its a total mess.I thought that my throttle axis doesnt move only if I run some script...but no.Throttle aint work when I run editor or device analyzer too.I probably need to do totaly new instalation of warthog and target from the scratch,,,but probably to erase all connected registry entries or something. And I am not a geek for that

https://r.tapatalk.com/shareLink?url=https%3A%2F%2Fforums%2Eeagle%2Eru%2Fshowthread%2Ephp%3Ft%3D186286&share_tid=186286&share_fid=74365&share_type=t TM throttle stops work after starting script Послато са D6503 уз помоћ Тапатока

Go to device&printers, right click throttle,properties or settings (calibration windows) and move sliders buttons etc.Or do that in device analyzer in T.A.R.G.E.T Послато са D6503 уз помоћ Тапатока

I am using GUI, but its happening with all scripts, stock and custom.Its strange that in device menager before I run script I have this situation http://prntscr.com/eym37c So there is a 4 spots for TM Warthog and when I run script I have this http://prntscr.com/eym4zv blue stripes runing TM devices and red disabled TM devices And this situation can be seen in Device and Printers with 2x Combined devices, Throttle and HID compliant !!! http://prntscr.com/eym5ov

Yes but in device analyze I have several HID devices and Thrustmaster Combined isn't checked, that one HID with no name is.And...my throttle axis wont work when I run script.When I stop it,everything is fine Послато са D6503 уз помоћ Тапатока

My firmwares are 11 and 23,newest one right? Послато са D6503 уз помоћ Тапатока

Hello there After I start any script, my warthog throttle wont work well. Full swing of throttle from off to max I get response like 3%.When I stop script throttle works ok.Any thoughts? Sry about my english :helpsmilie:

Try to go through ordinary windows calibration.It`s helped me with TM throtle calibration spikes

rly????? I saw some posts and pictures with green text where ppl talks that should be green

And my T.A.R.G.E.T command centre window is not in fullscreen or windowed mode...its like something between,i cant see upper part of it and need to close it in taskbar+ rightclick+ close... Послато са D6503 уз помоћ Тапатока

:megalol::megalol::megalol: I just done windows calibration and VOILA!!! it worked

Hello guys I constantly have problems with my week old TM warthog.First, scripts doesnt work in T.A.R.G.E.T ,then today after 2 days of nice DCS flying I started DCS A10c and I see that throttle doesnt move in game cockpit.All lamps on hardware works, computer recognizes throttle, but in windows calibration window when I move throttle stick red axis lines moves like 1 mm.Then I used 1.07 TM calibration tool and once I revived one throttle axis but not the other one.Then that axis died too. Ive done new instalation of hardware, new drivers, computer restarts but nothing helps.Can it be that potentiometer for that axis is broken inside?

:( if this help someone my target gui looks like this http://prntscr.com/exr7sc

Hmmm I didnt change anything,but I can pull up a dual throttles up and back for engine cut off,problem is in flight if I pull throttles without pull it up/back to off position engine stops working Послато са D6503 уз помоћ Тапатока

so no one can help?

After using TM throttle calibration tool v 1.07 I still cant get 100% thrust in A10c (DCS world 1.5) but I get engines off when I pull dual throttle to 0. I thought that engines going off when pull Throtlle head up and back??? Right? Pls help

Please help :cry:. I recently bought TM warthog and instalation went good,but when I load any script for any game, text in T.A.R.G.E.T GUI window never turn green...its stay gray and "launching and runing" spining all the time and on the top of the text I can see *** Allocated ProcInstances found from the previous run: use FreeProcInstance() *** Any thoughts?