taz_fighter

It would be great help to see a 3camera.lua for a PLP setup... the resolution will remain as native for the two side monitors and the center TV but I think FOV (per side monitor) will have to be set correctly for the side monitors to match the edge of center TV... Even right now I am in 3camera mode but its a LLL setup...

Here is my current setup (3 x 27" bezel-less monitors)... I did not mention the fourth touch screen with Helios... but the fourth is handled separately. In your 1camera solution: 1) how would the 1920 vertical sides line up against the 1200 center monitor? See that is where my problem of PixelsPerInch comes in... How would I line up the left right images with the center image? 2) The 2160x1200 is not a native resolution (i.e. 16:9 ratio, 1.77778 but 1.8 ratio) so how does the center monitor treat it? In your 3camera solution: 1) It looks like the three monitors are in landscape mode and I was asking for a Portrait-Landscape-Portrait solution.

I am trying to make a 3 screen (2 monitors + 1 TV) PLP setup such that: LEFT: 27" 1920 x 1080 in portrait mode Monitor CENTER: 50" 3840 x 2160 in Landscape mode TV RIGHT: 27" 1920 x 1080 in portrait mode Monitor What would be the best way to have this setup? The issue I am facing is: 1) difference in monitor/TV PixelsPerInches between center TV vs. side monitors would not allow a 1camera LUA resolution of (1080+3840+1080) x (2160) to look right. 2) What would be the 3camera lua setting for above?

Issue resolved by ED via ticket in 8 hours (and those were sleeping 8 hours on a weekend), the offline status was reset on their end... thumbs up to ED (especially to "MotorEAST")... :thumbup:

I installed a new graphics card and my system crashed badly during driver tweaking. I had to reset my bios (by removing and reinserting the coin cell), unfortunately DCS was in OFFLINE mode and now that my system is working I am getting "Failed to get authorization data. Error code is: 409". None of my A10C, A10A, Combined Arms or A10C basic training DLCs work. Although they are authorized even in the game (or online) I get the same error for both DCS 1.5.8 and 2.5.2 @BIGNEWY Please help!

An 8" 800x480 panel is 186x141 total and 161x121 active panel. Cougar MFD is 141x141 total and 108x108 window. So, the panel will fit vertically and exceed horizontally. Attached photo is a simple concept of combining the panel and MFD with a separator (plywood/plastic/cardboard) in the middle with 108x108 window and a angled bracket that will have screws from sides through into wooden "holdings" clenching the panel in the middle. Note: join the separator, mfd and bracket with screws from the back of mfd.

A 7" diagonal 800x600 (4:3) panel is 154mm x 119mm overall size with active size of 141mm x 106mm. Merely 2 mm shy on one dimension. Proper enclosure can marry the Cougar MFD with this panel pretty nicely I guess... Here is an example 7" (4:3) panel: http://www.ebay.com/itm/Board-800X600-V-0-Controller-Vga-Av-Audio-Lcd-A070sn02-V1-7Inch-Kyv-N3-N-/332206606687?hash=item4d590e895f:g:8woAAOSwImRYHe9c Cougar Dimensions: https://forums.eagle.ru/attachment.php?attachmentid=31565&d=1253814034