gorzasty

Sorry, I'd really like to help but uninstalled DCS right now because of bad performance in VR :( Wysłane z mojego SM-G960F przy użyciu Tapatalka

OK, I'm back. I made a lot of tests with different parameters, included yours. After all you have told me now I can barely achieve 60fps in the mission with cold start at Mi8 I wrote about earlier. Still CPU is the bottleneck. In other mission sometimes I have more room and sometimes reprojection is on all the time (heavy one) 60fps is still my target because I really don't like reprojection (45fps at 90Hz or 30fps at 60Hz), so I need to tweak setting to achieve minimum 60fps but it is good to have more - it is obvious. So, conclusion is - I pass for now with DCS. Maybe I will back in the future when it will be more mature with VR. 60fps in low/mid settings is not for me. Thank you guys for all your help. Stay high!

Hello guys Is it possible to set TacView server to not show/stream current telemetry, but shifted 15-30minutes? Or maybe better solution would be to not showing any telemetry until end of the mission - then create acmi file which you could provide farther. Sometimes TacView telemetry is used by cheaters as a "radar". I'd like to block this method but still want to use TV at the end.

Thank you all. When I back home try everything and let you guys know. Wysłane z mojego SM-G960F przy użyciu Tapatalka

Thank you 1) Yes my Reverb G2 is running 60Hz because I don't like reprojection. My goal is to reach min 60fps in 60Hz mode. My setup is ok with this in simple missions with few planes, but sometimes DCS behave strange as I wrote about Mi-8 mission. 2) Ok, thank you, so my CPU is OK then. 3) in attachment? In idle my CPU running 1-5%. No special services in background. Is there any report I can post here? 4) in attachment I know my actual setting are quite high, but It runs OK in most simple mission (stable 60fps). In mission with Mi -8 (cold and dark) only one options can help to have sometimes 60, but not always - shadows off. The rest of the option doesn't matter in this case as I was testing. I will not play DCS without shadows - looks like a game from, 70's then for me. 5) Thank you didn't know that - give it a try

Guys please. This is threat that I created to get some help. Can you talk about your monitors somewhere else please? Don't spam here. Does anyone have any idea how to help? Looking forward for some moderator to clean this thread please. Now it is total mess. @NineLine?

OK, I put 32768 values for min/max and make a test. Results are worst... now even my GPU is struggling and CPU is as earlier. For this test I also deleteed and recomplied shaders. CPU was @ 4.9GHz

Yes I started my own thread, but I can see so many people have problems with VR and optimization that must be some global answer for this. An answer inside DCS I guess. So why not put it here for everybody? I know there are many different configuration of hardware and software, but in many other titles everything works ok in VR. Here way superb machines is so so or unplayable.

I have 32GB of RAM. I guess DCS is ok with this. How about with my page file then? Do I need to set it manually? If yes what value do you recommend @silverdevil? Wysłane z mojego SM-G960F przy użyciu Tapatalka

Thank you Flappie: C:\Users\gorza>wmic pagefile list /format:list AllocatedBaseSize=4864 CurrentUsage=0 Description=C:\pagefile.sys InstallDate=20200929200028.281394+120 Name=C:\pagefile.sys PeakUsage=1 Status= TempPageFile=FALSE In my Windows settings I have this:

Please don't take it personally but your posts are rather well suited for monitors and problems with GPU. There is problem with CPU and VR or maybe not only VR... And I really like to thank you for your help. Wysłane z mojego SM-G960F przy użyciu Tapatalka

Any news here? It seems that this problem was abandoned...

Sorry Glide, but can you create your own threat? I really try to have some help with my case and your last posts are not helping. Can I post something more that help anyone to solve the issue? Is anybody I can tag to take a look here?

Thx guys but non of your ideas help. Can somebady confitm that is bad optimization that needs to be fixed or can I do something more tobhave this game playable in VR? Wysłane z mojego SM-G960F przy użyciu Tapatalka

Ok, thank you for advice. I have all sync off. What is NCP? I made more tests and this problem with CPU is almost always near airports. Especially with AI on it. In the mission I described there is a civil plane that is going to land where we are starting. If I switch camera to this plane CPU occupation is lowering but when distant to landing is less then 8km than it starts to grow and fps drops. So I think this is some kind of bad optimization. It is hard to believe that a few AI (doing nothing, not fighting) can eat i5 8600k at 4.5GHz... thank you, I've checked this and it's off on my computer. I have 4 HDD, but two SDD. System is installed on the different SDD than DCS. Page file is off. Have the newest Nvidia Drivers, and my system is quite new (two months maybe) with every update installed.

I posted my problem here: Can anybody help me?

Ok, I've read all the linked threads. No Oculus software, my soft is up to date, the newest Steam VR beta is ON. Here is my log: https://files.fm/u/wrd2swyg3 My DxDiag: https://files.fm/u/wz8cvk6p3 Anyone could help me, or is it just bad optimization of DCS?

Hello After many months I decided to check how is DCS doing with its performance. Is it any better? Got new hardware so I gave it a shot. Run my favourite module - Mi-8. Instant action - cold start. Mission start and... reprojection comes in... 30fps. Sh!t Run FPSVR and see what is going on, and... I don't understand this. GPU is OK. CPU is in trouble, but utilization doesn't hit 30%! Can anybody tell me what is going on here??? My specs: i5 8600k @4.5GHz, 32GB RAM 3200MHz, GTX 3080, HP Reverb G2 (SS 50%, 60Hz mode) Last Open beta. Here is the pic: https://ibb.co/1snLs15

Thank you Speed of heat! That is strange... I can't see any signature using Chrome. I switched to IE and everything works. THX!

Hello Guys Haven't been here for a while. Can you tell where I can find the newest version of this mod with IC pass? Is still upgrade in framerates so high? At least anyone can tell me what files I should delete to pass IC?

My Tapatalk doesn't work anymore... Any help?

I think you have 2 options - adapt to low fps in VR or wait few years for a new engine. It has been so long since 2.5.6 came out and put weak performance even more to not acceptable level for many. I'm not counting for promised optimisations... they talking about them many times and nothing. Sorry but for me it looks like they dont know what to do with their actual engine to make it better i VR. Wysłane z mojego SM-G960F przy użyciu Tapatalka

Ok thx anyway. Wysłane z mojego SM-G960F przy użyciu Tapatalka

140fps in VR??? Not possible in DCS :) Wysłane z mojego SM-G960F przy użyciu Tapatalka

Nice, will watch it later on my computer. It would be great start to prepare some bechmark. Same for all. Sending or not gathered data for analisis. Everyone has differen pc so... with that kind of information you coud do research about performance holes and what to repair to bring it back where it was. Wysłane z mojego SM-G960F przy użyciu Tapatalka