grim_reaper68

Hi just tested it and could reproduce it. But I had the EMP and DIR alarms too. C AERO doesn't have to do with Pitot or static probe (ANEMO alarm), but with the ADC (Air Data Computer).
Here the part of the AERGES doc 
Failure lights
- ANEMO (PITOT) amber failure light: Indicates a failure of the left total probe or static port heating, or that the probe heater (ANEMO) switch is off. The incidence probe and the right total probe do not have heating failure indication.
- C.AERO (ADC) amber failure light:
o Indicates a failure of the air data computer.
o The autopilot disengages or cannot be engaged.
o The flying aid gains get frozen, in particular:
 The sock-cones and the ARTHUR remain in the last position
 The following may be lost or operate untimely:
· A/B oversboost
· Overspeed
· Limit warning light
· Slaved altimeter
· Combat high-lift devices
But in my case, after starting the engine, C AERO disappeared after 1 or 2 minutes and I could reset the EMP and DIR. So in my mind, it could comes from a too cold equipment.
Here my track, where you can see the C AERO light extinguish .
C.AERO.Grim.trk
Just made a second test in the same conditions as you -10°C, and worked fine.
C.AERO.Grim-10.trk

In fact after a search, the first decimal is odd, so the only available frequecies decimals are .10, .15, .30, .35, 50, .55 etc... up to .95. 
I also found ILS freq for Zweibrücken that are 108.35 for runway 3 (29.96°) and 109.35 for runway 21 (209.96°). Not sure they where accurate in the cold war period, but would be nice to have them to be able to make ILS landing on ZWB. As now there is only the runway 3 ILS, They should have to add the runway 21 ILS on the map.

Ok, my bad, it's the autolase script that is unable to follow the target. No changes between the out of date and up to date scripts.
By using the radio procedure, the laser follows the target. I made a report on their github page.

Hi don't ask me why, now, it's working, without doing anything...
 

As told the folder is mod_tech_aircraft_damien_24.08.24 , in the saved games\mods\aircraft\mod_tech_aircraft_damien_XX.XX.XX (depends if you have the latest or the penultimate one) , look in the shape folder, if you find an Barax.edm, simply rename it. It should solve the problem. Other way to find it out is to use Visual Studio Code for example and to go to the dcs saved game root folder and to use search with the word barax.  
To prove what I say. Here first with barax.edm in the mod_tech_aircraft_damien_24.08.24 shape folder


And now with the modified name


You can also notice that the position of the pod of the first one is too high.

I search for flares in the control menu, found nothing. 
Here a screen from the cyclic stick grip control page, can youtell me where the command is?

Edit: I found it 
 

it's the cmds_up_press and cmds_down_press command. I thought it was a single button.

Here a screen from DCS page and from DCS directly
 


Maybe the french news aren't updated since 2021...
After check on the english page, in fact it's up to date. I also checked the other langanges, spanish latest update is from 2022. 
 

On my side, I've found that my own mod was the cause of crash. After investigation, it was a syntax in an lua file (light section) that was in fault. 

Hi works fine on the french version 
 

Yes. It is, as the cause is external of DCS core.
 

Hi
Don't ask me why, but when setting intensity_max to 0 for the landing and taxi light, those "ghost" spots disappears. Maybe someone from ED can explain me why?

How did the Mirage F1 make babies?


And so it's finished 🤣

In the monitorsetup file it's the LEFT_MFCD.
 

Hi it's RIGHT_MFCD. But you only have the scope.