bpmorris

This annoys me too, I have just hoped it would go away at some point during an update.

Ok so it looks like it's all sorted. I was not verbalising BOTH decimal values for the radio freq. Interesting that these commands are still not listed in editor drop down list. Sorry for the final rookie mistake :)

Thanks @hornblower793 !! I ended up importing an old VA profile and it all started working again with a minor exception. I cannot get the ARIO commands to be recognised except for TACAN Tune. For example RADIO Tune is not recognised at all, interestingly this command is not listed in the Viacom Editor tab command phrase drop down.... ARIO is otherwise enabled and working as the Tacan Tune command is working. I have tried resetting all options to regenerate the Viacom pro database but Radio Tune, Link Tune and Map Marker are still not in the drop down list... any suggestions??

Hey All, I am still wrestling with this and noticed that its not limited to the F14. For example I can lower thr landing gear in the F18 with a custom VA command but whenever I try any of the official VA commands like attempting an ATC inbound call nothing happens and I see the PTT use active node error in the VA app log. Any suggestions would be greatly appreciated!

Hi All! I have been wrestling with this for weeks and have not been able to get ARIO working after rebuilding my PC. Other custom VA commands are working fine, just all the ARIO commands are recognized but not passing through to DCS. Any suggestions would be greatly appreciated! Cheers Ben

I have the same issue I think. Interestingly when I right mouse click on the command directly with the mouse and execute from within the profile I see the following pop up in game. "Airio: Radio command out of range". I have also tried exporting and importing a new VA profile that already includes the Tacan, Radio and Datalink commands with no luck in getting those specific commands to be recognized.

Hi All, Should the new Radio Tune, Tacan Tune commands appear in the VA config app keyword list? Currently I cannot for the life of me get VA to recognise these commands. All other Jester commands appear to be working and I have these new commands copied into the VA profile as per the manual. I have had this working before I rebuilt Windows which makes this all the more annoying. Any advice would be appreciated. Cheers Ben

AppCrash on opening SimShaker Beta App Hey Guys! I was hoping someone might have some advice for me in that in the last week this application has started to immediately crash when opening. I see it briefly in the task tray but when I hover over it it, it immediately closes. I have tried uninstalling and reinstalling without any success. I am running the latest version of Windows 10 and try to keep all drivers at the very latest. Below is the XML data from the two Application Log event entries that get recorded when attempting to open the app. Any suggestions or advice would be greatly appreciated. Log Name: Application Source: Application Error Date: 7/1/2019 7:57:17 PM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: DESKTOP-TPHU46L Description: Faulting application name: SimShaker for Aviators beta.exe, version: 1.3.7.3, time stamp: 0x5d0616f4 Faulting module name: KERNELBASE.dll, version: 10.0.17763.475, time stamp: 0x9877ee8b Exception code: 0xe0434352 Fault offset: 0x0011c762 Faulting process id: 0x1654 Faulting application start time: 0x01d52ff35d808222 Faulting application path: C:\Users\bpmor\AppData\Local\Apps\2.0\EK4LY7TT.JQT\7J75DT9O.J1H\sims..tion_582bdd2a80198c18_0001.0003_207c481763c8ff81\SimShaker for Aviators beta.exe Faulting module path: C:\Windows\System32\KERNELBASE.dll Report Id: f41cf3e5-1e91-49cb-8919-9c151bfde1d1 Faulting package full name: Faulting package-relative application ID: Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2019-07-01T09:57:17.117412400Z" /> <EventRecordID>3242</EventRecordID> <Channel>Application</Channel> <Computer>DESKTOP-TPHU46L</Computer> <Security /> </System> <EventData> <Data>SimShaker for Aviators beta.exe</Data> <Data>1.3.7.3</Data> <Data>5d0616f4</Data> <Data>KERNELBASE.dll</Data> <Data>10.0.17763.475</Data> <Data>9877ee8b</Data> <Data>e0434352</Data> <Data>0011c762</Data> <Data>1654</Data> <Data>01d52ff35d808222</Data> <Data>C:\Users\bpmor\AppData\Local\Apps\2.0\EK4LY7TT.JQT\7J75DT9O.J1H\sims..tion_582bdd2a80198c18_0001.0003_207c481763c8ff81\SimShaker for Aviators beta.exe</Data> <Data>C:\Windows\System32\KERNELBASE.dll</Data> <Data>f41cf3e5-1e91-49cb-8919-9c151bfde1d1</Data> <Data> </Data> <Data> </Data> </EventData> </Event> Log Name: Application Source: .NET Runtime Date: 7/1/2019 7:57:17 PM Event ID: 1026 Task Category: None Level: Error Keywords: Classic User: N/A Computer: DESKTOP-TPHU46L Description: Application: SimShaker for Aviators beta.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.Xml.XmlException at System.Xml.XmlTextReaderImpl.Throw(System.Exception) at System.Xml.XmlTextReaderImpl.Throw(System.String, System.String[]) at System.Xml.XmlTextReaderImpl.ParseText(Int32 ByRef, Int32 ByRef, Int32 ByRef) at System.Xml.XmlTextReaderImpl.ParseText() at System.Xml.XmlTextReaderImpl.ParseElementContent() at System.Xml.XmlTextReaderImpl.Read() at System.Xml.XmlTextReader.Read() at System.Xml.XmlTextReaderImpl.Skip() at System.Xml.XmlTextReader.Skip() at System.Configuration.XmlUtil.StrictSkipToNextElement(System.Configuration.ExceptionAction) at System.Configuration.BaseConfigurationRecord.ScanSectionsRecursive(System.Configuration.XmlUtil, System.String, Boolean, System.String, System.Configuration.OverrideModeSetting, Boolean) at System.Configuration.BaseConfigurationRecord.ScanSectionsRecursive(System.Configuration.XmlUtil, System.String, Boolean, System.String, System.Configuration.OverrideModeSetting, Boolean) at System.Configuration.BaseConfigurationRecord.ScanSections(System.Configuration.XmlUtil) at System.Configuration.BaseConfigurationRecord.InitConfigFromFile() Exception Info: System.Configuration.ConfigurationErrorsException at System.Configuration.ConfigurationSchemaErrors.ThrowIfErrors(Boolean) at System.Configuration.BaseConfigurationRecord.ThrowIfParseErrors(System.Configuration.ConfigurationSchemaErrors) at System.Configuration.BaseConfigurationRecord.ThrowIfInitErrors() at System.Configuration.ClientConfigurationSystem.OnConfigRemoved(System.Object, System.Configuration.Internal.InternalConfigEventArgs) Exception Info: System.Configuration.ConfigurationErrorsException at System.Configuration.ClientConfigurationSystem.OnConfigRemoved(System.Object, System.Configuration.Internal.InternalConfigEventArgs) at System.Configuration.Internal.InternalConfigRoot.OnConfigRemoved(System.Configuration.Internal.InternalConfigEventArgs) at System.Configuration.Internal.InternalConfigRoot.RemoveConfigImpl(System.String, System.Configuration.BaseConfigurationRecord) at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(System.String, Boolean, Boolean, Boolean, Boolean, System.Object ByRef, System.Object ByRef) at System.Configuration.BaseConfigurationRecord.GetSection(System.String) at System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection(System.String) at System.Configuration.ConfigurationManager.GetSection(System.String) at System.Configuration.ClientSettingsStore.ReadSettings(System.String, Boolean) at System.Configuration.LocalFileSettingsProvider.GetPropertyValues(System.Configuration.SettingsContext, System.Configuration.SettingsPropertyCollection) at System.Configuration.SettingsBase.GetPropertiesFromProvider(System.Configuration.SettingsProvider) at System.Configuration.SettingsBase.GetPropertyValueByName(System.String) at System.Configuration.SettingsBase.get_Item(System.String) at System.Configuration.ApplicationSettingsBase.GetPropertyValue(System.String) at System.Configuration.ApplicationSettingsBase.get_Item(System.String) at SimShaker.Properties.Settings.get_Starter_ShowBalloon() at SimShaker.UI.AutoStarterForm..ctor() at SimShaker.Program.Main(System.String[]) Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name=".NET Runtime" /> <EventID Qualifiers="0">1026</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2019-07-01T09:57:17.071925000Z" /> <EventRecordID>3241</EventRecordID> <Channel>Application</Channel> <Computer>DESKTOP-TPHU46L</Computer> <Security /> </System> <EventData> <Data>Application: SimShaker for Aviators beta.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.Xml.XmlException at System.Xml.XmlTextReaderImpl.Throw(System.Exception) at System.Xml.XmlTextReaderImpl.Throw(System.String, System.String[]) at System.Xml.XmlTextReaderImpl.ParseText(Int32 ByRef, Int32 ByRef, Int32 ByRef) at System.Xml.XmlTextReaderImpl.ParseText() at System.Xml.XmlTextReaderImpl.ParseElementContent() at System.Xml.XmlTextReaderImpl.Read() at System.Xml.XmlTextReader.Read() at System.Xml.XmlTextReaderImpl.Skip() at System.Xml.XmlTextReader.Skip() at System.Configuration.XmlUtil.StrictSkipToNextElement(System.Configuration.ExceptionAction) at System.Configuration.BaseConfigurationRecord.ScanSectionsRecursive(System.Configuration.XmlUtil, System.String, Boolean, System.String, System.Configuration.OverrideModeSetting, Boolean) at System.Configuration.BaseConfigurationRecord.ScanSectionsRecursive(System.Configuration.XmlUtil, System.String, Boolean, System.String, System.Configuration.OverrideModeSetting, Boolean) at System.Configuration.BaseConfigurationRecord.ScanSections(System.Configuration.XmlUtil) at System.Configuration.BaseConfigurationRecord.InitConfigFromFile() Exception Info: System.Configuration.ConfigurationErrorsException at System.Configuration.ConfigurationSchemaErrors.ThrowIfErrors(Boolean) at System.Configuration.BaseConfigurationRecord.ThrowIfParseErrors(System.Configuration.ConfigurationSchemaErrors) at System.Configuration.BaseConfigurationRecord.ThrowIfInitErrors() at System.Configuration.ClientConfigurationSystem.OnConfigRemoved(System.Object, System.Configuration.Internal.InternalConfigEventArgs) Exception Info: System.Configuration.ConfigurationErrorsException at System.Configuration.ClientConfigurationSystem.OnConfigRemoved(System.Object, System.Configuration.Internal.InternalConfigEventArgs) at System.Configuration.Internal.InternalConfigRoot.OnConfigRemoved(System.Configuration.Internal.InternalConfigEventArgs) at System.Configuration.Internal.InternalConfigRoot.RemoveConfigImpl(System.String, System.Configuration.BaseConfigurationRecord) at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(System.String, Boolean, Boolean, Boolean, Boolean, System.Object ByRef, System.Object ByRef) at System.Configuration.BaseConfigurationRecord.GetSection(System.String) at System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection(System.String) at System.Configuration.ConfigurationManager.GetSection(System.String) at System.Configuration.ClientSettingsStore.ReadSettings(System.String, Boolean) at System.Configuration.LocalFileSettingsProvider.GetPropertyValues(System.Configuration.SettingsContext, System.Configuration.SettingsPropertyCollection) at System.Configuration.SettingsBase.GetPropertiesFromProvider(System.Configuration.SettingsProvider) at System.Configuration.SettingsBase.GetPropertyValueByName(System.String) at System.Configuration.SettingsBase.get_Item(System.String) at System.Configuration.ApplicationSettingsBase.GetPropertyValue(System.String) at System.Configuration.ApplicationSettingsBase.get_Item(System.String) at SimShaker.Properties.Settings.get_Starter_ShowBalloon() at SimShaker.UI.AutoStarterForm..ctor() at SimShaker.Program.Main(System.String[]) </Data> </EventData> </Event>

+1

Update: Once I changed the DCS 'Special' communications option back to 'Default' the communications menu started to work again and my VA voice commands. Winning... :)

I managed to get it working by doing a master reset of the Lua code from within VA and restarting the app. Now to figure out how to get the 'Communications Menu' to reliably open as the default binding of '\' doesnt work and changing to another keyboard key gives similar results...

Hi All, I am having issues getting the 'VAICOM PRO for DCS World' menu to detect the F-14 when it detects the F-18 fine. I would like to ask if the issue is due to there not being any F-14 references in the following file: *.\Saved Games\DCS.openbeta\Scripts\VAICOMPRO\VAICOMPRO.export.lua I am on the beta branch of VA and have uninstalled\reinstalled a few times. VA - 1.7.3.9 VIACOM - 2.5.9.1 Many Thanks Ben

Hi All, I know this is an old thread but it describes exactly what I want to do. Is it still the case that DDIs cannot be exported to another monitor whilst in VR? It would be awesome to be able to flip up the headset and use the screens on occasion. Thanks

Hi prccowboy, I will be very interested to hear how your testing goes! I have spent many hours over the last couple of days trying all combinations but cannot get my second GPU to move above about 8% utilization. My test is just spawning onto a carrier in an F-18 at which point I get a rock solid 45-46fps no matter what I change. All my cores are not over utilized, I can see the two cores with higher loading which will be DCS but they dont exceed about %60 utilization either. Oh and the other point which might immediately discount this working for me is that I am using DCS in WMR with a Samsung Odyssey. Generally speaking the performance is perfectly usable and very impressive, I am just wanting to eek out every fps I can by throwing hardware at the problem. Cheers Ben

I am just in the process of trying out SLI with two ROG 1080Ti 11G cards and cannot see any performance increase after trying all the advice in this thread. Currently I can only see load on one of the GPU's no matter what I try. Just thought I would ask if anyone is currently running SLI successfully at the moment? My setup - 8700k(5Ghz), 32GB 3200 RAM, 500GB NVME