Jorik
-
Posts
70 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Jorik
-
-
Hi guys,
I've ordered a Virpil CM3 base and its on its way but now I'm looking in to mounting it to my self made Alu Extrusion table mount.
On the Virpil forum I found a drawing of the WarBird base, can somebody confirm if the contours and mounting holes on the bottom of the base are identical to the CM3 Base?
That way I can send a design to a local company to get a mounting plate laser cut.
Thanks for the help in advance.
-
Nice
So its all in that third switch? -
The only other things I can think of are power and circuit breakers. Make sure all circuit breakers on the left and right side are on, and that all your power is set correctly. Generators, rectifiers, all that fun stuff.
O boy. You made my day. I forgot to turn on the circuit breakers on the right side
-
1
-
-
The gunsight switch is on the armament panel (centre, behind the cyclic). I can't remember what it's called but I think it's in the top right quarter of the panel.
It's a normal 2 way toggle switch, up is on if I remember correctly.
Hi
That switch is on. But still no gunsight
-
Hi guys,
I’m trying to figure out what I’m missing in my startup because I don’t get a gunsight.
When starting hot and turning on the sight switch on the pilot armamentpanel the gunsight works perfectly. But doing the same after a manual startup doesn’t give a gunsight.
Thanks in advance.
-
Hi there,
1- I would be interested in the F16 grip for sure. And F18 throttle grips would be nice as-well. F35 would be nice if we get a descent F35 module on DCS but that ain’t gone happen in the foreseeable future.
2- I use Monstertech type desk mounts.
Best regards
Jorik -
I have the same problem on the super carrier with my G2. And yesterday I noticed the same happening flying the F16 out of Incrilik airbase on the Syria map. Turning of bloom doesn’t help. Side note, a friend flying the Reverb G2 aswell has the same problem.
Is there a way to turn off MSAA in DCS and replacing it in the Nvidia control panel? -
I have the same problem. And I can't fly without the controllers. I let it rest on my lap and when I need to push some buttons in pit I use the controllers, mostly only the right one.
But this is a WMR issue. Pressing the Windows button on one of the controllers puts you in the cliff house and it shuts down DCS so you can start all over again or loose your mates halfway a flight in multiplayer. -
That shows the module name in the Voice Attack command window
Go to Other\Advanced\ the command second from the bottom "Write a value to the event log"
Whenever you operate the PTT with that command added to a PTT you'll see the module name
Thank You very much
Now we know the A-4E is just A-4
-
2
-
-
On 12/8/2020 at 9:14 AM, Hollywood_315 said:
To see the module name, add a 'Write to log' command to one of your TX press commands using the token {TXT:vaicompro.playerdata.currentmodule.name}. Start a mission and press the TX.
Where can we turn on the Write To Log to determine module names?
-
19 hours ago, Weegie said:
You need to move the "Execute external plugin command" at the top, to be between the "Begin Text Compare" and "End" command, as stated earler by Hollywod
At the moment there is nothing executed inside your IF statement
You'll then need to make an identical command for every module, with the module you want selected in your "Begin Text Compare" command
Thanks for the help. That did the trick.
-
1
-
-
Hi Guys,
I'm trying to setup a different controller profile for every aircraft because my comm-switches are completely different from one aircraft to another because I want them to resemble the real layout as close as possible. But I can't seem to get around the VoiceAttack exposed variables.
I tried to make a duplicated of every TX (I have no Joystick assigned to the default TX's in the VAICOM profile) and make a duplicate for every aircraft with "Equal to". But this assignment keeps reacting in other aircraft as well.
So I tried the other way around with Not Equal to but still these assignments keep reacting in VAICOM in the other aircraft.
The assignments above is just for ICS on the Huey to test it out.
Could somebody point me in the right direction ?
Thanks guys,-
1
-
-
Could you supply us with the dimensions of the small case left of the main collective handle? I mean the one with the small red button for the laser on it.
This would really be appreciated.
Thanks -
Hi guys,
I'm fairly new to VAICOM but I'm loving every bit of it.
Now do I fly mostly F-14, F-18, Harrier and A-10C and this while using the TM Warthog. But all of these birds have different HOTAS Comm setups. Is there a way to have VAICOM recognize witch module you are flying and set the correct button PTT settings accordingly?
I have noticed in the manual something like Exposed Variables but I have no clue how to tackle the PTT settings the best way.
Did anybody succeed in this?
-
I can't read the graphics image ... but why don't you try it and see...
they are likely necessary to get the full benefit of the mod, they are likely not necessary if you want to pass the IC...
The files are:
- bazar/shaders/deferred/gbuffer.hlsl
- bazar/shaders/deferred/shadows.hlsl
- bazar/shaders/deferred/decoder.hlsl
- bazar/shaders/deferred/atmosphere.hlsl
- bazar/shaders/model/functions/glass.hlsl
- bazar/shaders/posteffects/nvd_common.hlsl and the fix file
- bazar/shaders/materialfactory/ils151.hlsl
-
To make your own IC compliant version of the MOD do the following:
1) install the MOD using OvGME or JGSME. and the other installation steps as per the readme file
2) go to multiplayer in game and see which files are causing an IC failure and note them down
3) uninstall the MOD
4) remove those specific files from the MOD
5) reapply the MOD
6) repeat steps 2 - 5 as required.
I get an IC pass failure on the following files.
If I delete these, what functionality do I lose? Are they necessary for the MOD?
Thanks for the help.
-
Hi there guys,
- I'm getting the hang of using VAICOM and its a really great tool.
Now do I have a little problem using it together with SRS. I setup SRS and VAICOM following the user manual of VAICOM. But when I turn on "Allow VAICOM TX Inhibit" I can't seem to get a constant push to talk in SRS using the same PTT as I use in VAICOM. Am I missing something?
- And another small question.
When I turn on ICS Hot Mic for AIRIO it turns on all the radio's to hot. Even for AI ATC etc. How can I fix this?
Thanks for the help in advance.
-
After the 2.5.6 it’s a good idea to play with the gamma setting.
-
Hi, First of many thanks for these great missions!!
I was wondering how I could get Paddles to contact met on approach on the Stennis. I am on Freq 266,00 but can't seem to get any response from the LSO. Marshall does work.
-
Was this not listed in the last changelog as fixt?
I can't seem to create any new steerpoint in the UFC, maybe I am doing something wrong.
I just select an empty steerpoint and change the coordinates in the DED.
After entering these, nothing pops-up as new steerpoint.
-
Hello. Try it again after updating to the newest VA version. Either I have modded mine a lot, or your looks a little older.
~Bailey
O God
I didn't notice that I had 1.4 installed.:doh:
Thanks for the help.
-
Hi guys,
I'm new to voice attack but can't seem to install the F-14 profile.
Voice attack gives me an error about a line in the XML file.
Does anybody have an idea what's causing this?
Best regards
Jorik
-
Hi Guys,
I'm trying to lower my Pings in the MP lobby by using a VPN Connection.
In the moment I'm testing the VyprVpn but when connected I can't see any servers listed.
The VPN Firewall is allready turned off.
Does anybody have any experience using this service of any idea what the problem is?
-
I received my unit today.
Installed very easy but I only have the button working. None of the two axis’s work.
Just like the post I quoted.
Any idea how to fix this?
Kind regards
Jorik
I've fixed it myself, no idea what the real problem was.
I've reinstalled the original one and upgraded the Firmware again.
After the new firmware upgrade with the original sensor all was well with the new one aswell.
Thanks for this amazing product!!
Best regards
Jorik
Rotorheads - Helicopter oriented PVE
in Multiplayer
Posted
Hi Guys,
A few weeks ago I discoverd the Rotorheads server and I had a blast. But now I seem to not be able to join the Discord again. Yesterday my profiles got hacked from Facebook, Instagram and even Discord, After this I didnt have access to the Discord anymore. I did create a new Discord profile and my old one is now being deleted but I can't join on the Rotorheads Discord.
How can I rejoin?
Thanks for the help.